XH-A153 Li-ion Battery Bluetooth 5.0 Power Amplifier Board 2CH 3W+3W DC5V

Description

Sophisticated product, please handle with care; quality first, credit upmost;
Your satisfaction is our pursuit;The strength of technology decide the quality of technology.                                         if  you have any problem,pls contact with us.
XH-A153 Li-ion Battery Bluetooth 5.0 Power Amplifier Board 2CH 3W+3W DC5V
The main parameters:
Product name: Bluetooth audio amplifier board
Charging port:
Micro USB / Type-c USB
Product model: XH-A153
Function type: Amplify audio
Power supply voltage: DC5V
Bluetooth version: 5.0
Chip type: PAM8403*1
Number of channels: two-channel stereo
Output power: 3W×2
Magnification: 4 times
Appearance size: 93*42*25mm
Installation hole distance: 86*35mm
common problem
1. The problem of Bluetooth connection failure.
Answer: The Bluetooth indicator light flashes regularly when it is working normally. If it stays on or does not light up, there may be a problem with the Bluetooth module.
2. The mobile phone can be connected but the laptop or desktop computer cannot be connected.
Answer: If the mobile phone can connect and play music, it means that there is no problem with the Bluetooth power amplifier board. There may be a problem with the computer's Bluetooth driver, the version is too old or there are files missing. It is recommended to uninstall and then install the latest version of the driver.
3. When the volume is turned up, the sound will be stuck, intermittently, and it can be played normally after the volume is turned down.
Answer: One of the reasons: the power is too small. Check whether the 18650 battery is installed and whether the voltage is too low. You can replace it with a new battery to test;
Reason 2: There is no 18650 battery installed, and the charging port is used to supply power directly. Because this product is charging, the current that the power chip can pass through is relatively small (about 200mA). After the sound is turned on, the power supply will be insufficient, causing the speaker Caton. However, you can connect the power supply directly to the battery holder, skipping the limitation of the charging chip.
The third reason: If the power supply is ok, it may be that the power of the speaker is too low. For example, if the output is 3W, but a 1W speaker is connected, the volume is turned on, there will be a stutter phenomenon, and the speaker may be burned out.
4. There is too much noise when playing music, or there is a bottom noise when no music is played.
Answer: The function of the power amplifier board is to amplify the signal. The main source of noise is that the radio clutter in the environment is amplified by the power amplifier board, so a little noise is normal. If the noise is too large, you can change the power supply to test, or change Speaker test.
List:
XH-A153*1
connection line*2
Shipping
Feedback
Payment
Return policy
Contact us
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.
All package need to
wait 30 days
,
Please take care it.Less than 30 days,we can't take a refund
.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers
are responsible
for import duties,custom fees and taxes, if any, please check your country.
Return policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
XH-A153 Li-ion Battery Bluetooth 5.0 Power Amplifier Board 2CH 3W+3W DC5V
The main parameters:
Product name: Bluetooth audio amplifier board
Charging port:
Micro USB / Type-c USB
Product model: XH-A153
Function type: Amplify audio
Power supply voltage: DC5V
Bluetooth version: 5.0
Chip type: PAM8403*1
Number of channels: two-channel stereo
Output power: 3W×2
Magnification: 4 times
Appearance size: 93*42*25mm
Installation hole distance: 86*35mm
common problem
1. The problem of Bluetooth connection failure.
Answer: The Bluetooth indicator light flashes regularly when it is working normally. If it stays on or does not light up, there may be a problem with the Bluetooth module.
2. The mobile phone can be connected but the laptop or desktop computer cannot be connected.
Answer: If the mobile phone can connect and play music, it means that there is no problem with the Bluetooth power amplifier board. There may be a problem with the computer's Bluetooth driver, the version is too old or there are files missing. It is recommended to uninstall and then install the latest version of the driver.
3. When the volume is turned up, the sound will be stuck, intermittently, and it can be played normally after the volume is turned down.
Answer: One of the reasons: the power is too small. Check whether the 18650 battery is installed and whether the voltage is too low. You can replace it with a new battery to test;
Reason 2: There is no 18650 battery installed, and the charging port is used to supply power directly. Because this product is charging, the current that the power chip can pass through is relatively small (about 200mA). After the sound is turned on, the power supply will be insufficient, causing the speaker Caton. However, you can connect the power supply directly to the battery holder, skipping the limitation of the charging chip.
The third reason: If the power supply is ok, it may be that the power of the speaker is too low. For example, if the output is 3W, but a 1W speaker is connected, the volume is turned on, there will be a stutter phenomenon, and the speaker may be burned out.
4. There is too much noise when playing music, or there is a bottom noise when no music is played.
Answer: The function of the power amplifier board is to amplify the signal. The main source of noise is that the radio clutter in the environment is amplified by the power amplifier board, so a little noise is normal. If the noise is too large, you can change the power supply to test, or change Speaker test.
List:
XH-A153*1
connection line*2
Shipping
Feedback
Payment
Return policy
Contact us
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.
All package need to
wait 30 days
,
Please take care it.Less than 30 days,we can't take a refund
.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
3.Buyers
are responsible
for import duties,custom fees and taxes, if any, please check your country.
Return policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 14.12.2022 hat der Verkäufer die folgenden Angaben hinzugefügt: