-40%

White BallMAKER MOLD for making SLUGS cal. 44 for black powder Remington Colt

€ 12.67

Availability: 100 in stock
  • Marke: BallMAKER
  • Condition: Neu
  • Herstellernummer: nicht zutreffend
  • Rücknahme akzeptiert: ReturnsNotAccepted
  • Herstellungsland und -region: Polen

    Description

    This BallMAKER MOLD is for casting cal. 44 SLUGS, mainly for black powder Remington Colt Pietta's or Uberti's revolvers.
    The BallMAKER mold is made of a durable resin, the cast is quite simple and it need the cheapest hot glue gun.
    Slugs casted using this mold
    have high accuracy
    and depending on the type of tip used
    high impact power
    .
    Projectiles of this form can be used in black powder shooting training. The hot glue is similar material like rubber, does not damage the barrel and is easy to clean. Missiles can often be found whole after shooting.
    You can shoot this slugs by 3 ways:
    -
    standard shooting
    - using normal materials as for lead bullets, but using a smaller dose of gunpowder, about 0.25g,
    -
    less lethal shooting
    - using only 6mm short cartridges for nipples from the French company H&C, intended especially for Pietta and Uberti revolver replicas, (energy similar to a very strong air rifle)
    -
    soft shooting
    - using only standard percussion caps putted on original nipples with holes enlarged to 2.5 mm. (energy of a typical air rifle)
    Making such slugs of hotglue yourself is very cheap compared to other ammunition on the market!
    To increase the weight of the cast slugs, it is best to use steel bearing balls.
    The heavier the ball, the harder it hits the target, or more effectively disable the attacker.
    Rounded shape causes that the slug does meet with less resistance in the barrel
    and accurately hits the target. The hollows at the bottom uses all the pressure,
    which gives the slug maximum shot speed and increasing it range.
    BallMAKER slugs have center of mass on the tip that slugs always hit with it.
    Each mold is sending with
    casting instruction
    and some
    free different steel balls
    .
    Instructions for casting slugs you can also watch on a movie with other similar mold:
    WARNING: YOU SHOOT YOUR OWN RELEASED SLUGS AT YOUR OWN RISK !!!
    WARNING: REMEMBER THAT THE GUN DAMAGE CAUSED BY SHOOTING FROM THESE SLUGS ARE NOT SUBJECT TO COMPLAINTS !!!
    DO NOT SHOOT TO PEOPLE AND ANIMALS!!!