-40%
Universal STC-1000 Digital Temperature Controller Thermostat with Sensor AC 110V
€ 5.18
- Description
- Size Guide
Description
integratemoteintegratemote
Recommended
New product
Universal STC-1000 Digital Temperature Controller Thermostat with Sensor AC 110V
Main Instructing
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration. Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Specification and Size
Front panel size: 75(l)×34.5(w)mm
Sensor length: 2M (include the probe)
Product size: 75(l)×34.5(w)×85(h)mm
Mounting size: 71(l)×29(w)mm
Technical parameters
Temperature measuring range:-50℃~99℃
Resolution:0.1℃
Accuracy:±1℃(-50℃~70℃)
Sensor error delay: 1 minute
Power supply: AC110V~220V
Power consumption:<3W
Relay contact capacity: Cool(10A/AC250V); Heat(10A/AC250V) Sensor: NTC 10K (1pce)
Ambient temperature:0℃~60℃
Storage temperature: -30℃~75℃
Relative humidity:20~85% (No condensate)
Display instruction:
three-digit LED +Minus digit+ Status indicator light (Status indicator light(Cool, Heat)+Set indicator (Set)
Key instruction:
”S”: the key to set; “▲”: Up key;”▼”: Down key; ” ”:the key to turn on and off the power
Indicator light status instruction
Indicator light
Function
Note
Cool indicator light
On: refrigeration starts; Off: refrigeration stops; flash: compressor delay
Cool, Heat indicator light can not be “on” status simultaneously
Heat indicator light
On: heating starts; Off: heating stops;
Set indicator light
On: parameter setting status
Key operation instruction
1.The way to check parameter:
Under normal working status, press and release”▲ ” key once instantly, it display temperature setting value; press and release” ▼ ” key once instantly, it displays the difference value. It back to display the normal temperature display status in 2s.
2.The way to set parameter:
Under controller normal working status, press ”S” key for 3s or more to enter parameter modifying mode, and the ”Set” indicator light on, screen display the first menu code”F1”. Press”▲” key to avoid the interference, the sensor down-lead and power wire should be kept a distance or “▼” key to page up and page down menu item to find accordingly code, press“S” key to display the parameter set value of the current menu. press and hold “S” key, press “▲” key or “▼” key again to adjust up and down the parameter setting value of the current menu item. Press and hold both “S” key and “▲” key or “▼”key simultaneously to choose and adjust the parameter value of the current menu value promptly. After finishing the setting, press and release the “ ” key instantly to save the parameter modified value and return to display the normal temperature value. If no key operation within 30 seconds, system won’t save modified parameter, screen back to display normal temperature. Screen display “Er” if error appears during parameter saving, and back to normal working status 3 seconds.
3.Restore system data
When electrified, system will check itself, screen will display “Er” if error exit, please press any key at this time, and it restore default value and enter into normal working mode. It is advised to reset the parameter value under this condition
Operation instruction
Under controller normal working status, press and hold “ ”key for 3s can turn off the controller; under controller “off” status, press and hold “ ” key for 3s can turn on the controller.
Under the controller normal working status, screen display the current temperature value; also the controller can also switch the working mode between heating and cooling.
Controller starts refrigerating with cool indicator light on when the measuring temperature≥temperature set value+ difference value, and the refrigerating relay is connected; the “Cool” indicator light flashes, it indicates the refrigerating equipment is under compressor delay protect status; when the measuring temperature ≤temperature set value, the Cool indicator light on, and refrigerating relay disconnects.
System starts heating when the measuring temperature value ≤the temperature set value-difference value, and the “Heat” indicator light on, and the heat relay connects; when the measuring temperature ≥ temperature set value , the “Heat” indicatorlight is off, and the heat relay disconnects.
Menu instruction
Code
Function
Set range
Default
F1
Temperature set value
-50℃~99℃
10℃
F2
Difference set value
1-10℃
3℃
F3
Compressor delay time
1-10 min
3 min
F4
Temperature calibration value
-10℃~10℃
0℃
Error description
Alarm when sensor error: controller activate the sensor error alarm mode when sensor open circuit or short circuit, all the running status is closed off with the buzzer, and the nixie tube display ”EE”, press any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.
Alarm when he measuring temperature exceeds temperature measuring range: controller activates the error alarm function when the measuring temperature exceeds the temperature measuring range, all the running status is closed off with the buzzer alarms, and the nixie tube display ”HH”, press any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.
Safety regulations
★Danger
1、Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrong connections or overloading the relay.
2、Dangers:prohibit connecting the wire terminals without electricity cut-off.
★Waring
1、Prohibit using the machine under the environment of over damp, high temp, strong electromagnetism interference or strong corrosion.
★Notice
1、The power supply should conform to the voltage value indicated in the instruction.
2、To avoid the interference, the sensor down-lead and power wire should be kept a distance.
Package Included:
1PCS*Digital 220V STC-1000 Pro Temperature Controller Thermostat Regulator + NTC Sensor
About us
Payment
Shipping
Feedback
Return Policy
Contact Us
About us
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Return Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact Us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 31.12.20 hat der Verkäufer die folgenden Angaben hinzugefügt:
