-40%
Universal Auto LED Dual Digital Ladeluftkühler Lader Temperaturanzeige Sensor to
€ 4.21
- Description
- Size Guide
Description
HOMEON SALE
+FOLLOW
Car Dual Digital LED Display Intercooler Supercharger Temperature Gauge Sensor
Condition:
100% new
Shell Color:
Black
Material:
Metal&Plastic
Size:
approx. 4.7x2.8x1.7 cm(1.85x1.10x0.67 inch) (LxWxH)
Cable Length:
approx. 96 cm(37.80 inch)
Display Color:
Red + Blue
Supply Voltage:
DC 4-28V
Measuring Temperature:
-50 ℃ ~ 125 ℃
Accuracy:
0.1 ℃
Item included:
1 x Dual Digital Temperature Gauge
Compatible With:
fit for universal cars
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
Product Dimension:
Feature:
1) 100% new with good quality.
2) Easy installation.
3) Stable characteristics, high reliability.
4) Measure car internal and external temperature.
5) Measure air conditioned room indoor and outdoor temperature.
6) Measure refrigerator internal and external temperature.
7) Measure fish pond water temperature.
8) Measure infant bath water temperature.
Parameter adjustment operation instructions:
Key function:
All key operations in the table are divided into long press and short press; long press button for about 3 seconds to release, short press button for 1 second to release.
Setting mode
In normal mode, press and hold the button for 3 seconds to enter the setting mode, display
C1, then release the button, then short button , cycle Display: C1 C2 CA.
C1: indicates temperature 1 fine adjustment correction setting
C2: indicates temperature 2 fine adjustment correction setting
CA: indicates bidirectional temperature reset factory setting
Temperature 1 trim correction
1) In the setting mode, press the button to switch to display C1, long press the button to enter the temperature 1 fine adjustment setting.
2) At this point, release the button and then "long press the button", the value will increase upwards. When the button is released, the value of "long press button" will be displayed again.Decrease downward and adjust to the corresponding temperature value repeatedly.
3) Wait for the screen to flash to save the settings and return to the previous menu.
Temperature 2 correction correction
1) In the setting mode, press the button to switch to display C2, long press the button to enter the temperature 2 fine adjustment setting.
2) At this point, release the button and then long press the button , the value will increase upwards. When the button is released, the value of "long press button" will be Reduce, repeatedly adjust to the corresponding temperature value.
3) The screen mark flashes to save the settings and return to the previous menu.
Two-way temperature recovery factory settings
In the setting mode, press the button to switch to display CA, long press the button to enter the two-way temperature to restore the factory settings.
At this point, release the button and then "short button", the loop displays: NO_YES
NO: indicates that there is no factory reset.
YES: means to restore factory settings.
Show NO by default.
When switching to the corresponding parameter number, release the button, wait for the screen to flash and return to the previous menu.
Am 13.05.21 hat der Verkäufer die folgenden Angaben hinzugefügt: