-40%
STC-1000 Pro Digital AC220V Temperature Controller Thermostat NTC 10K Sensor
€ 6.09
- Description
- Size Guide
Description
Sales for every weekend!For Raspberry Pi
For Arduino
For Mega2560
Relay
Amplifier
ESP8266
UNO R3
USB/LCD L/C Meter
Power supply
Step up module
Step down module
Adapter Module
Display module
Sensor
Ein-Euro-Artikel
Breadboard Cable and Prototype
GPRS Board
Switch
LED
Cables
Wireless module
Receiver&Transmitter
Servo
STC-1000 Pro Digital 110V-220V Temperature Controller Thermostat NTC 10K Sensor
Main Instructing
Switch the modes between cool and heat; Control temperature by setting the temperature setting value and the difference value; Temperature calibration. Refrigerating control output delay protection; Alarm when temperature exceeds temperature limit or when sensor error.
Specification and Size
Front panel size: 75(l)×34.5(w)mm
Sensor length: 2M (include the probe)
Product size: 75(l)×34.5(w)×85(h)mm
Mounting size: 71(l)×29(w)mm
Technical parameters
Temperature measuring range:-50℃~99℃
Resolution:0.1℃
Accuracy:±1℃(-50℃~70℃)
Sensor error delay: 1 minute
Power supply: AC110V~220V
Power consumption:<3W
Relay contact capacity: Cool(10A/AC250V); Heat(10A/AC250V) Sensor: NTC 10K (1pce)
Ambient temperature:0℃~60℃
Storage temperature: -30℃~75℃
Relative humidity:20~85% (No condensate)
Display instruction:
three-digit LED +Minus digit+ Status indicator light (Status indicator light(Cool, Heat)+Set indicator (Set)
Key instruction:
”S”: the key to set; “▲”: Up key;”▼”: Down key; ” ”:the key to turn on and off the power
Indicator light status instruction
Indicator light
Function
Note
Cool indicator light
On: refrigeration starts; Off: refrigeration stops; flash: compressor delay
Cool, Heat indicator light can not be “on” status simultaneously
Heat indicator light
On: heating starts; Off: heating stops;
Set indicator light
On: parameter setting status
Key operation instruction
1.The way to check parameter:
Under normal working status, press and release”▲ ” key once instantly, it display temperature setting value; press and release” ▼ ” key once instantly, it displays the difference value. It back to display the normal temperature display status in 2s.
2.The way to set parameter:
Under controller normal working status, press ”S” key for 3s or more to enter parameter modifying mode, and the ”Set” indicator light on, screen display the first menu code”F1”. Press”▲” key to avoid the interference, the sensor down-lead and power wire should be kept a distance or “▼” key to page up and page down menu item to find accordingly code, press“S” key to display the parameter set value of the current menu. press and hold “S” key, press “▲” key or “▼” key again to adjust up and down the parameter setting value of the current menu item. Press and hold both “S” key and “▲” key or “▼”key simultaneously to choose and adjust the parameter value of the current menu value promptly. After finishing the setting, press and release the “ ” key instantly to save the parameter modified value and return to display the normal temperature value. If no key operation within 30 seconds, system won’t save modified parameter, screen back to display normal temperature. Screen display “Er” if error appears during parameter saving, and back to normal working status 3 seconds.
3.Restore system data
When electrified, system will check itself, screen will display “Er” if error exit, please press any key at this time, and it restore default value and enter into normal working mode. It is advised to reset the parameter value under this condition
Operation instruction
Under controller normal working status, press and hold “ ”key for 3s can turn off the controller; under controller “off” status, press and hold “ ” key for 3s can turn on the controller.
Under the controller normal working status, screen display the current temperature value; also the controller can also switch the working mode between heating and cooling.
Controller starts refrigerating with cool indicator light on when the measuring temperature≥temperature set value+ difference value, and the refrigerating relay is connected; the “Cool” indicator light flashes, it indicates the refrigerating equipment is under compressor delay protect status; when the measuring temperature ≤temperature set value, the Cool indicator light on, and refrigerating relay disconnects.
System starts heating when the measuring temperature value ≤the temperature set value-difference value, and the “Heat” indicator light on, and the heat relay connects; when the measuring temperature ≥ temperature set value , the “Heat” indicatorlight is off, and the heat relay disconnects.
Menu instruction
Code
Function
Set range
Default
F1
Temperature set value
-50℃~99℃
10℃
F2
Difference set value
1-10℃
3℃
F3
Compressor delay time
1-10 min
3 min
F4
Temperature calibration value
-10℃~10℃
0℃
Error description
Alarm when sensor error: controller activate the sensor error alarm mode when sensor open circuit or short circuit, all the running status is closed off with the buzzer, and the nixie tube display ”EE”, press any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.
Alarm when he measuring temperature exceeds temperature measuring range: controller activates the error alarm function when the measuring temperature exceeds the temperature measuring range, all the running status is closed off with the buzzer alarms, and the nixie tube display ”HH”, press any key can cancel alarm sound, system back to display the normal temperature when the error and the fault is cleared.
Safety regulations
★Danger
1、Strictly distinguish the sensor down-lead, power wire and output relay interface from one another, and prohibit wrong connections or overloading the relay.
2、Dangers:prohibit connecting the wire terminals without electricity cut-off.
★Waring
1、Prohibit using the machine under the environment of over damp, high temp, strong electromagnetism interference or strong corrosion.
★Notice
1、The power supply should conform to the voltage value indicated in the instruction.
2、To avoid the interference, the sensor down-lead and power wire should be kept a distance.
Package Included:
1PCS*Digital 220V STC-1000 Pro Temperature Controller Thermostat Regulator + NTC Sensor
Payment
Shipping
Refund
Feedback
Payment
We accept Paypal ONLY. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances.
Shipping
We will arrange shipping for you
within 24 Hours
after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in
1-2 business days
after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
Refund
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 23.10.20 hat der Verkäufer die folgenden Angaben hinzugefügt:
