-40%
OBD2 Head-Up Display Auto HUD Turbo-Ladedruckmesser Alarm Ölanzeige Codeleser de
€ 14.56
- Description
- Size Guide
Description
OBD2 Head-Up Display Auto HUD Turbo-Ladedruckmesser Alarm Ölanzeige Codeleser deDescription
P15 OBD 2 II Car HUD 2.84 inch TFT LCD OBD2 Head Up Display Speedometer Tachometer with Overspeed Warning Water Temperature Voltage RPM Alarm
Specification:
OSD language: English, Chinese (Simplified, Traditional)
Display size: 2.84 inch
Ambient temperature: -40~+80°C
Atmospheric pressure: 86-106kPa
Relative humidity: 10%-95%
Environmental noise: <=60dB(A)
Alarm sound level: =30dB(A)
Working voltage: 9V~16V DC (12V DC/400mA)
Product size: diameter 73*thickness 23mm
Product weight: 58g
Packing box size: 14.3x9x5.1cm
Gross weight: 185g
Compatibility:
For OBD2 gasoline vehicles produced in the United States after 2004
For OBD2 gasoline vehicles produced in other countries after 2008.
Not applicable to the following vehicle models:
NOT for Dodge, NOT for JEEP, NOT for IMSEOER, NOT for Chrysler, NOT for cars manufactured in the United States before 2004;
NOT for French and Italian cars: NOT for Fiat, NOT for Maserati, NOT for Lamborghini, NOT for DS, NOT for Peugeot, NOT for Citroen, NOT for Renault, NOT for Simca, etc.
NOT for some Japanese cars: NOT for Suzuki, NOT for Mazda 6, NOT for Infiniti (QX50 Q50 Q501), NOT for Toyota AVANZA 2013, NOT for Lexus (is250, ex250, ES300H), NOT for Honda (Jazz, CRV), NOT for cars produced before 2008.
NOT for some cars of Kia and Hyundai in South Korea (NOT for Hyundai Sonata 2013, NOT for Kia Soul PS 2017, etc.)
Incompatible: Hybrid and diesel cars, pickup trucks, RVs, cars equipped with modified car computers, NOT for Volvo, NOT for Chrysler Group, NOT for Fiat Group's all brand models.
Incompatibility: OBD2 models cannot be used on German cars and above before 2004, please use GPS models.
FAQ:
1. Nothing on the screen, no power
Start the car engine, check whether the OBD cable is tightly connected, unplug it and plug it in several times, if it still does not display, it is recommended to change the car to test, analyze whether the car OBD diagnosis interface is broken, if the OBD diagnosis is broken, it is recommended to repair it Good OBD interface, connect to HUD again, it can be used normally
2. It is powered on, the boot screen is displayed and connected, and it will automatically turn off after 60 seconds.
This product is only suitable for cars with OBDII and EOBD interfaces
The car was produced in the U.S. After 2003, OBDII and EOBD began to be used in other regions after 2007
This product does not support OBD I and JOBD. It is recommended to change the car to test
There is an error between the vehicle speed and the dashboard display
Please check whether the unit is correct. Kilometer KM/mile MPH (reference setting item for speed unit switching)
b. After booting up and displaying normally, press and hold the dial button vertically for 5 seconds to enter the system settings, and dial right to select the speed error adjustment for fine-tuning (for example, the dashboard displays 100 and the driving computer displays 101 to 106%)
3. There is an error in fuel consumption
Check the displacement of your vehicle, set the same displacement in the system settings (if the car is 2.0L, adjust to 2.0L). If the displacement is the same, you can also set it in the system settings. The fuel consumption data fine-tuning setting is recommended. The data is the trip computer data, no need to fine-tune.
4. RPM alarm settings
The default speed alarm is 6000 rpm alarm, adjust the alarm value according to the demand (see system settings for details)
5. Overspeed alarm setting
The default value of overspeed alarm is 150KM/H Adjust the alarm value according to requirements (see system settings for details)
6. Unable to shut down
A. There is a vehicle speed display after the flame is turned off, the speed is set to zero in the system settings, and it is displayed after the flame is turned off
Vehicle speed (if the vehicle speed shows 5KM/H, it will be adjusted to 5KM/H)
B. After the flame is turned off, there is a speed display, and the shutdown voltage setting in the system settings is adjusted to 13.2V
7. When the machine goes out when the traffic light is on, the car will start and stop automatically
Adjust the shutdown delay setting in the system settings to 180 seconds or more
8. Wrong operation causes the machine to crash.
Long press the pulsator to enter the setting menu, enter the system settings, dial the pulsator to the right to select restore
Factory settings Short press to confirm, restore factory settings
Warning:
Please disconnect the HUD if you don’t drive for more than a week, because the OBD device has a normal standby current of about 20 mA. Generally, the car battery has a theoretical standby time of 1 month. Due to different vehicle conditions, it is recommended to unplug the OBD device when the car is not used for a long time.
Note:
There may be slight size deviations due to manual measurement, different measuring methods and tools.
The picture may not reflect the actual color of the item because of different photographing light, angle and monitor.
Package:
1 X HUD
1 X OBD Cable
1 X Base
1 X Double-Sided Tape
1 X Screwdriver
1 X Screw
1 X Manual
Package includes
Payment
Shipping
Returns
Contact Us
Wir akzeptieren nur PayPal!!
Mitteilungen an unser Kundenservice nur via eBay Email. Bitte senden Sie keine Mitteilungen via unsere PayPal Email, diese Emails werden nicht an unserem Kundenservice weitergeleitet.
Mehrwertsteuer
Diesen Artikel bieten wir mehrwertsteuerfrei ab Büsingen/Deutschland an.
Büsingen gehört zum deutschen Staatsgebiet aber weder zum deutschen Steuergebiet noch zum Zollgebiet
der EU. Deshalb ist die zollfreie Liefermenge auf einen Warenwert von täglich € 22,-- je Käufer begrenzt.
Lieferungen über dem Wert von € 22,-- sind abgabenpflichtig !
Wir versenden nur an Paypal Adresse!
Wenn Sie andere Adresse versenden möchten, bitte schreiben Sie uns die richtige Adresse in PayPal Hinweis, es ist nicht mehr möglich nachdem Bezahlung, die Adresse zu ändern.
Wir versenden Ihre Bestellung innerhalb von 2 Werktagen nach Zahlungseingang, außer an Sonn- und Feiertagen.
Unsere Standardlieferung wird nicht mit einer Tracking-Nummer geliefert. Aus irgendeinem Grund kontaktieren Sie uns bitte, wenn Sie das Paket nicht annehmen können. Wir werden unser Bestes tun, um Ihre 100% Zufriedenheit zu gewährleisten.
Bei Rückkehr ist es innerhalb von 30 Tagen möglich. And erstattung wird so angegeben werden: Merchandise Credit
Bitte eröffnen Sie keinen Fall oder Rückgabeanfrage,bevor Sie mit uns im Kontakt bleiben. Wir werden alles versuchen, möglich, das Problem zu beheben, wenn wir einen Fehler gemacht, bitte gehen Sie nicht davon ein Fehler ist gewollt.
Unsere Bürozeiten sind MONTAG - FREITAG 9:00 - 18:00 PST, aber wir werden Ihnen antworten, sobald wir Ihre Nachricht erhalten haben. Wenn Sie am Wochenende eine Nachricht oder eine E-Mail senden, kann es zu Verzögerungen bei der Antwort kommen.