Mechlabor STM 200 and 600 series studio tape recorder screw and roller set

Description

Mechlabor series STM-200 and STM-600 tape recorders by default have static steel legs that are screwed in the metal frame, which makes diffucult to handle the heavy beast. They apply special fine threads for the screws which are hard to find (if at all) in machine part stores.
The core of the offered sets are the lathe manufactured fine threaded steel screws, which fit into the original threaded holes, thus the original authentic legs can be kept, and remounted whenever the owner wishes. The metal bodied rubber rollers can be fitted by the special screws easily. No need to make any alterations in the original frame, Plug&Play! The additional 3 washers serve as spacers to level the fourth roller of the frame in case there are level differences.
Deliverables:
2x high quality steel bodied grey rubber  rollers (60mm diameter, total height is 90mm, total load is 60kg per roller) with brake mechanism for the roller and for the rotating table
2x high quality rollers without brake mechanism
(60mm diameter, total height is 90mm, total load is 60kg per roller)
4x hand manufactured screws, fitting in the original threaded holes on the frame
3x washers (level balance)
The photo with the machine legs is for illustration only. The machine is not part of the offer!
Any question please send me a note. Before bidding, please ask for the shipping cost! I will send an invoice with the correct shipping cost.
The pack is some 1,5 kg, cost at average is around 15 Euros, but for example Russia is much more expensive.
This is a private sale, no guaranty, no return whatsoever.
The prices do not include any customs, duty and VAT. These possible costs depend on the individual country of destination, and should be born by the buyer locally.