MakeSkyBlue MPPT Solar Charge Controller 30A 40A 50A 60A 80A 100A 120A Not PWM

Description

MakeSkyBlue MPPT Charge Controller
When you choose the V118, then it's no wifi function.
When you choose V119, then it's
W
ifi version and this Wifi is working for Android phone
only
.
It does not work for Apple IOS system.
Product Features:
Intelligent Maximum Power Point Tracking technology
Built-in DSP controller with high performance
Automatic battery voltage detection 12V/24V/36V/48V
Three-stage charging optimizes battery performance
Multi-function LCD displays
Overcharge protection
Over temperature protection
Easy to be mounted
Suitable for battery types such as sealed lead acid, vented Gel, LiFePo4 and Lithium battery
Notes
: The output terminal is for DC only ( 12V system less 60W, 24V/36V/48V system less 100W ),
and it will be burnt if connecting to other loads. The output for battery is no polarity reverse protection.
Datasheet
Model No.
30A
40A
50A
60A
Charging mode
MPPT Maximum power point tracking automatically
Charging Stages
3-stage
：
constant current (MPPT), constant voltage(Absorption Voltage), Floating charge stages
Battery System types
DC12V/24V/36V/48V Recognition automatically
System voltage automatic recognition
12V system (DC9V-DC15V)
24V system (DC18V-DC29V)
36V system (DC30V-DC39V)
48V system (DC40V~DC60V)
Soft start time
≤1S
≤1S
≤1S
≤1S
Dynamic response and recovery time
100us
100us
100us
100us
Max efficiency
≥98.1%
(Voc is 1.5 or 2 times than battery, then it’s best efficiency)
PV utilization
≥99%
≥99%
≥99%
≥99%
Input specification
Voc from PV
( Make sure the Voc of PV meeting the requirement as right. Voc is 1.5 or 2 times than battery, then it’s best efficiency. )
12V system (DC20V~DC80V)
24V system (DC37V~DC105V)
36V system (DC50V~DC160V)
48V system (DC72V~DC160V)
The maximum PV input power
(The total power rated of PV can’t be over this watt that will break the controller.)
12V system (400W)
24V system (720W)
36V system (1000W)
48V system (1200W)
12V system (480W)
24V system (960W)
36V system (1400W)
48V system (1700W)
12V system (600W)
24V system (1200W)
36V system (1800W)
48V system (2200W)
12V system (720W)
24V system (1440W)
36V system (2100W)
48V system (2800W)
Output specification
Optional battery type
(default is Sealed battery)
Vented/ Sealed / Gel / NiCd / Lithium battery
(defined voltage for other battery by user)
For 12V battery, you could set the voltage from 12V-17V.
For 24V battery, you could set the voltage from 24V-34V.
For 36V battery, you could set the voltage from 36V-51V.
For 48V battery, you could set the voltage from 48V-68V.
Absorption Charging Voltage
Refer to Batteries charging reference
Floating Charging Voltage
Refer to Batteries charging reference
Overcharging protection voltage
12V system (15V)
24V system (30V)
36V system (45V)
48V system (60V)
Rated output current
30A
40A
50A
60A
Temperature Coefficient
±0.02%/
℃
Output voltage ripple-peak
100mV
100mV
100mV
100mV
Output voltage accuracy
≤±1%
≤±1%
≤±1%
≤±1%
Indicating
LCD display
See LCD display instruction
See LCD display instruction
See LCD display instruction
See LCD display instruction
Protection function
Output over-voltage protection
See output specification
See output specification
See output specification
See output specification
Input Anti-intrusion protection
yes
yes
yes
yes
Temperature Protection
75
℃
75
℃
75
℃
75
℃
Temperature Unit
Celsius
Fan-on temperature
>45
℃
>45
℃
>45
℃
>45
℃
Fan-off temperature
<40
℃
<40
℃
<40
℃
<40
℃
Other parameters
Acoustic noise
≤40 dB
≤40 dB
≤40 dB
≤40 dB
Cooling way
Forced air cooling.
Components
Imported materials
，
Accord  to EU standards, Industrial grade range.
Environmental requirements
Meet 2002/95/EC; No cadmium, hydrides and fluorides
Properties
Size (mm)
215x115x50
215x115x50
215x115x50
215x115x50
Net weight(Kg)
1.1
1.1
1.1
1.1
Gross weight(Kg)
1.2
1.2
1.2
1.2
Security Level
According to CE
、
PSE
、
FCC
、
EMC,EN60950
Electromagnetic Compatibility
According to EN61000
，
EN55022
，
EN55024
Enclosure
IP21
IP21
IP21
IP21
Content included
1 MPPT solar controller
1 set of parts for shell mounted
1 English manual
80A: You will get 2pcs 40A controllers and make them in parallel, then it's as 80A controller.
100A:
You will get 2pcs 50A
controllers
and make them in parallel, then it's as 100A controller.
120A:
You will get 2pcs 60A
controllers
and make them in parallel, then it's as 120A controller.
------------------------------------------------------------------
---------------------------------
---------------------------------
---------------------------------
Special models for certain 72V 96V Battery only
1. The advanced application for V118 30A, 40A, 50A and 60A:
​If you want to control a big current load such as 100A, you could use the OU terminals to control it as below pictures.
(Figure 1)：Using a relay to control a small current switch to achieve an inverter switching machine.
(Figure 2)：Use relay to control high current load input circuit-loop.
2. The advanced application for V118 50A and 60A:
If your load device is shorted or over-current,
the controller will have output short-circuit protection and close the output.
When you disconnect the load and press ENT over 5 seconds,
then output will turn on again. Please note the 30A and 40A don't have this function.
3. The advanced application for V118 30A, 40A, 50A and 60A:
When the lithium battery is being charged,if the BMS protection board is turned off and the lithium battery is disconnected from the  charging
circuit.The MPPT output to the battery voltage will not rise suddenly, and the controller doesn't cause the output voltage to overshoot
through the BMS protection board.By the way, the V118 version for 30A-60A can be set the charging voltage
from 12V to 17V and the fake products is from 13.5V to 17V.
How to make these controllers in parallel?
For example, if you bought the 120A controller, then it's 2pcs 60A,
and you could connect them to each PV array to same battery directly and no need extra device or settings.
Most frequently asked question
1.
What information displays on the LCD?
PV voltage / Output power      Battery voltage / Charging current     Working mode / Temperature      Protection mode / ACC
2.
How to choose lithium for solar controller?
If Voltage from DC9V-DC15V, then as 12V styem. 24V/36V/48V as below.
12V system (DC9V-DC15V)    24V system (DC18V-DC29V)   36V system (DC30V-DC39V)   48V system (DC40V~DC60V)
3.
Why there is no display when I connect the battery?
Please choose right panels and battery, then connect all polarity correctly.Confirm your battery is over 12V, then the controller can start up.
4
. How to set the parameter for lithium?
Following the manual, just set the D04 to 01, then set the charging voltage.
5.
How to install the solar system if I don't have experience?
Please ask the local solar engineer or contact us for help.
6.
How to repair after 1 or 2 years?
Normally it works fine and if there is a problem, we'll provide spare parts for your repairing
in order to use our controller as long as possible.
7.
What's max wire size?
You shall input 9awg
/
6mm² for 30A and 40A.
And input 2pcs 9awg
/
6mm²  for 50A and 60A. (Refer to the listing photo)
8
.What's the difference between version V119 and V118?
V119 built-in WiFi port internal hardware supports medium-distance wifi connection to MakeSkyBlue Android phone APP MPPT controller parameter monitoring.
Model :
30A-V119-WiFi                    40A-V119-WiFi                    60A-V119-WiFi
Q: Where can I download the MakeSkyBlue MPPT V119 Controller APP?
A: Please browse makeskyblue.com .The offical website to download APP.Currently support Android phone only.
Q: Can I upgrade firmware from V117/ V118 to the latest V119-WiFi version?
A: No you can't.The V119-WiFi version build in WiFi kit sinide the motherboard,other verisons do not have this kit. However, the verison V117 support to upgrade as version V118 use our sepcial update tool.
Q: Will my old MSB controller work fine by mix verison V116/V117/ V118/V119 in parallel together ?
A: Yes./Sim/да/Si/Oui/Ja/نعم/ไทย/はい/हां Various version support in parllel without version limited.
Q:What does the meaning of D05 and D06?
A: D05 Clear password for Wifi version only.
D06 If you have accurate device and need to calibrate the battery voltage, then calibrate it by D06. Please be cautious to use this function.
151.
For example, if your accurate meter tests the battery and the voltage is 24.5V, but the controller battery voltage reads 24V , then use D06 to calibrate the voltage to 24.5V.
Warranty
One year
Shipment
We'll ship your items within 1 business day. All shipment with
tracking code.
We process and deliver the parcels from Monday to Saturday.
Payment
We accept PayPal only. Please make payment within 8 days after your purchasing.
Or unpaid-case will be opened by eBay automatically that will influence your eBay account.
If you want to cancel an order because of mistake process sometimes, please give us a message immediately
and we will cancel your order, then eBay will refund us.
After-service and Feedback
This is a very professional product and we recommend that you check and ask for more information about this device before placing your order.
Send all clear photos (the LCD shows all information by code) and panel/battery details to us by email.
The eBay message is unclear when any issues arise.