LIFEPO4 12v Lithium-Ionen Akku Zelle x4 DIY Selbstbau BMS NEU 12.8v 100ah 3.2v

Description

The deliveries will resume after July 20th
(For English see below)
Die Batterie enthält Folgendes:
1. 3.2V LIFEPO4 105Ah prismatische Aluminiumzellen x4
2. Hochwertiges DALY LIFEPO4 4S 12v 40A BMS (gemeinsamer Anschluss) x1
3. Beschichtete Kupfersammelschienen x3 (dicker und oxidationsbeständiger als die auf dem Foto)
4. Geeignete Schrauben x8
Technische Zellendaten:
Z
ellchemie:
LiFePO4
Nennspannung:
3.2 V
Nenn-Kapazität:
100 Ah (105Ah)
Entladestrom Konstant:
100 A
Entladestrom (Puls ≤5sec.):
200 A
Ladestrom max.:
50A
Arbeitsbereich:
2.5 V bis 3.65 V
Temperatur (Entladen):
-20°C bis
+55°C
Temperatur (Laden):
+5°C bis
+45°C
Lagertemperatur:
-20°C bis +55°C
Zyklenfestigkeit:
>3500 (80%DOD)
Eigenentladung (monatlich):
<5%
Anschlüsse:
M4, 6mm
Gehäuse:
Alu
Gewicht:
2kg ± 50g
Abmessung (lxbxh):
200x13x37mm
Tür-zu-Tür Lieferung innerhalb der EU zwischen 4 und 10 Tagen.
------------------------------------------
The battery is NEW, high quality, fully tested and ready to be used.
The kit includes battery management system (BMS) and everything needed for an easy set-up and use.
Using those cells allows for flexibility in configuring your system (3v, 6v, 12v, 24v, 36v, etc.), gives you a complete control over your battery bank, it is educational and fun!
The DIY kit can be used in a variety of applications for cost-efficient energy storage.
We live off-grid and have just upgraded our AGM / lead-acid (if you still use those, wait no more - upgrade!) System using these batteries and have ordered a bit more than needed, hence this listing :)
There is plenty of information about lithium iron phosphate batteries online, but we can also provide guidance and support for setting the battery up and using it in the best possible way, for best performance and extended life span.
The set includes the following items:
1.3.2v LIFEPO4 105Ah aluminum prismatic cells x4
2. High quality DALY LIFEPO4 4S 12v 40A BMS (common port) x1
3. Plated copper busbars x3 (thicker and more resistant to oxidation than the ones on the photo)
4. Suitable screws x8
Cell technical details:
- Nominal voltage: 3.2V
- Nominal capacity: min.
100Ah
- Discharge current: 2C nominal, max 0.5 in the temperature range 0 ° C ...- 10 ° C, max 0.3C in the temperature range -10 ° C ... -20 ° C
- Max. Discharge current 3C
- Charging current: 0.5C nominal, max 1C at temperatures above + 10 ° C
- Charge temperature range: + 5 ° C ... + 45 ° C,
below 0 ° C
the cell must not be charged
.
- Discharge temperature range: -20 ° C ... + 55 ° C
- Dimensions 130x200x37mm (WxHxD)
- Connection: M4 internal thread, 6mm deep.
Tightening torque <7Nm
- Cell weight: 2 kg
- Lifetime 3500 cycles at <80% (80Ah) depth of discharge (DoD)
Fast delivery with tracking!
The batteries are shipped within EU with delivery time between
4 and 10 days
.
This is a DIY system, so no responsibility for damage due to improper or incorrect assembly and use is assumed.
All subcharges and taxes are included.