-40%
FM Radio Transmitter & Receiver 87-108MHz DSP PLL LCD Serial Control PCB Board
€ 2.98
- Description
- Size Guide
Description
integratemoteintegratemote
Recommended
New product
FM Radio Transmitter & Receiver 87-108MHz DSP PLL LCD Serial Control PCB Board
FM Radio Transmitter
Description:
Material: Electrical components
Color: See pictures
Feature:
1. the use of advanced digital audio signal processing (DSP) technology with FM PLL (PLL) more realistic sound quality, more stable performance.
2. high stability quartz crystal oscillator provides a reference signal source for the FM signal carrier frequency output more accurate
3. the use of special low-noise audio operational amplifier provides MIC preamp.
4. digital control, the operation more convenient while making the product more stable and durable.
5. Unique PC audio transmitter, connected to the computer, you can let the computer instantly become FM radio.
6. power storage as frequency and volume information is automatically loaded on power frequency and volume before the power failure
7. LCD display is more intuitive and accurate, with very low power consumption and minimal noise interference.
8. Integrated lithium battery charge management, easy access battery.
Product parameters:
Output power: 100mW
Transmission frequency: 87.0MHz-108.0MHz
Frequency adjustment step: 0.1MHz / second (short key press), 1.0MHz / time (long button press)
Modulation modes: standard FM FM
Channel: MIC channel (mono), USB audio (stereo)
Equivalent noise: ≥30dB (sound close to CD quality)
Supply voltage: DC 3.0V-5.0V
Operating Current: 35mA
Transmitting antenna: 75cm whip antenna
Transmission Distance: FM transmitter module connected 75cm standard rod antenna with radio Desheng PL-660,
open to the measured coverage radius of
100 meters. (Note: The transmission range is for reference only, because the environment is slightly different)
Size: See the picture
No retail package
Package includes:
1 x DC 3-5V Audio FM RadioTransmitter Wireless Microphone Module 87MHz-108MHz
FM Radio Receiver
Features:
1. the use of advanced digital audio signal processing (DSP) and FM modulation phase-locked loop (PLL) to make sound more realistic, more stable performance, long working hours without frequency offset.
2. LCD display is more intuitive and accurate, with a very low power consumption and minimal noise.
3. Can search for radio stations and store radio function, easy to operate.
4. Built-in 30 digital volume adjustment button operation can be easily done.
5. automatic power-down memory data before the power failure.
6. speaker / headphone output automatic switching
7. quartz crystal frequency stabilization, the temperature change is no longer receiving frequency drift.
8. The professional audio DSP audio signal analysis and processing, automatic mute no signal or weak FM signal noise floor of the big time, away from the traditional FM radio signal or the signal is weak in the absence of annoying when rustle.
9. digital incremental rotary encoder to adjust the volume and frequency of use feel good, precise positioning, stable and durable, 360° rotation without dead ends.
10. 30-level digital volume adjustment range
11. Support for serial communication control, use other computer or device control MCU module with serial full functionality.
Product parameters:
Output power: 500mW (drive headphones), 3Wx2 (driving the speaker)
Frequency range: 50Hz-18KHz
Receiving frequency range:
Close the campus radio 87.0MHz-108.0MHz,
Open campus radio 76.0MHz-108.0MHz
Equivalent noise: ≥30dB
Supply voltage: 3.0V-5.0V
Supply Current: maximum volume 1000mA, minimum volume at 60mA (for reference only)
Channel: Stereo
<1> Power
The corresponding module port (PCB board labeling) -, +, respectively, then the power supply (battery) negative electrode and a positive electrode, a battery or other power source is recommended power supply. You can not use switching power supply without a filter (such as mobile phone chargers, and other switching power supply), or interfere with the power generated will affect the normal operation of the module. This module normal operating voltage of 3.0-5.0V, be careful not to exceed the supply voltage range.
<2> Antenna
FM_ANT port used to connect FM antenna for better reception FM signal, we recommend an external 75cm length of the rod antenna.
<3> headphone / speaker output
The module comes with 3WX2 channel audio amplifier, speakers To access the speaker ports is recommended 4Ω / 3W speakers. Such as plug in your headphones, audio is automatically switched to the headset channel speaker channels automatically shut down.
<4> Volume control
Turn the VOL encoder to adjust the volume, while the LCD screen shows the volume series.
<5> frequency regulation
FRE rotation encoder, receiving frequency, while the LCD screen displays the current frequency down short, encoder handle press to mute / un-mute switch.
<6> Mute
Press VOL knob down mute / un-mute
<7> Auto mute switch
Press down FRE knob turned on or off automatic mute function, LCD display captions ON Enables automatic squelch, OFF means turn off the automatic squelch.
<8> Automatic squelch threshold (Threshold) Adjustment (automatic mute switch opens effective)
Press FRE knob down, into the automatic squelch threshold adjustment interface, the user can use specific actions to adjust the automatic squelch threshold, adjustment range is 0-20, the higher the value, the more limited the door, the more likely weak signal Mute. On the contrary the opposite.
<9> access the serial port (not serial control without contact)
TTL level serial port module reserve control interface, TTL serial communication module of the need to connect UART_RX, UART_TX and GND Module (PCB corresponding to the location, there is marked), you can use an external MCU (microcontroller) or PC serial port to send commands associated control module Features. Note: Due to computer serial port level is not a TTL level, when connected to a computer connected to RS323 communication required to TTL level electrical switching device paperback or use USB to TTL level serial port module to communicate with the module. Because serial command control module requires some computer expertise, but not buyers please do not try.
<10> User Set
This module can be set whether the backlight state to listen to campus radio band, set as follows according to the user's application. Power-off state long press the VOL knob down electrical power LCD display showing open campus radio C0 C1 represents closed campus radio band, set to take effect after the restart. By setting the backlight state is off state press FRE knob key to turn the display backlight Always indicate B1, B0 denotes a backlight turned off 20 seconds after the restart to take effect. Repeat this step to change the setting to switch the state. The factory is set to not open unified campus radio band, backlight turns off 20 seconds without operation.
Note:
The factory default setting is Off campus radio, the backlight automatically turns off no operating 20S, Off Auto Squelch. Users set their own depending on the circumstances.
This module squelch adjustment method:
This module uses DSP digital squelch, the flexibility to use software to control the squelch threshold (threshold). When squelch threshold is 0-20 levels, the lower the number the lower the squelch threshold, the more likely to listen to the radio signal with the background noise, the higher the number, the higher the noise threshold, the output noise is higher than the set value, the automatic static Noise open, so that the output is muted. So when adjusting the squelch threshold, according to the case, if you want to hear the weak signal squelch threshold go down, if you want to hear a strong signal, number to increase. Note that the mute function is not the signal to remove background noise, but the noise level is determined by the signal exceeds the threshold value to control the output muted.
Package Included:
1 x Digital Stereo FM Radio Receiver Module (not contain cable)
About us
Payment
Shipping
Feedback
Return Policy
Contact Us
About us
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Return Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact Us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 31.12.20 hat der Verkäufer die folgenden Angaben hinzugefügt:
