-40%
ESP32-S WIFI Bluetooth ESP32-CAM Development Board OV2640 2.0MP Camera Module
€ 1.03
- Description
- Size Guide
Description
ESP32-S WIFI Bluetooth ESP32-CAM Development Board OV2640 2.0MP Camera ModuleESP32-S
WIFI Bluetooth Module
Descriptions:
The main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and a computing power of up to 600DMIPS.
Default 32Mbit SPI Flash, 520KB SRAM
Support SoftAP and Station mode
Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module
Support UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.
Support for firmware upgrade (FOTA)
Antenna supports on-board antenna or IPEX block output
Package Included:
1 x
ESP32-S
ESP32S WIFI Bluetooth Module ESP32 Serial to WiFi Module With Daul Antenna
OV2640 Camera Module
Feature:
The OV2640 image sensor features 2 megapixels (1632x1232 pixels)
Small size, low operating voltage, and provides all the features of a single chip UXGA camera and image processor.
Through the SCCB control, you can output the entire frame, sub-sampling, take the window, and a variety of resolution 10-bit sampling data.
The product UXGA images up to 15 frames per second.
The user can fully control the image quality, data format and transmission mode.
Specification:
High sensitivity for low-light applications
Low voltage for embedded applications
Standard SCCB interface, compatible with I2C interface
RawRGB, RGB (GRB4: 2: 2, RGB565 / 555/444), YUV (4: 2: 2) and YCbCr (4: 2: 2) output format
Supports UXGA, SXGA, VGA, QVGA, QQVGA, CIF, QCIF and up to 40x30 size
Supports VarioPixel sub sampling mode
Automatic impact control functions include: automatic exposure control, Automatic gain control, automatic white balance, automatic elimination of light stripes, automatic black level calibration. Image quality control including color saturation, hue, gamma, sharpness ANTI_BLOOM
ISP with noise cancellation and dead pixel compensation
Support image scaling
Lens loss compensation
Saturation automatic adjustment
Edge enhancement automatic adjustment
Noise reduction automatic adjustment
Sensing array: 1632x1232
Maximum format: UXGA IO
Voltage: 1.7V -3.3V
Analog voltage: 2.5 -3.0V (internal LDO to power supply 1.2V)
Power consumption TBD sleep: <20μA
Temperature operation: -30°C to 70°C
Stable working: 0°C to 50°C
Output format (8-bit)
YUV / YCbCr4: 2: 2 RGB565 / 555/444
GRB4: 2: 2 Raw RGB Data
Optical size: 1/4"
Viewing angle: 25 Degree
Maximum rate: 15fps
SXGA sensitivity: 1.3V / (Lux-sec )
Signal to noise ratio: 40dB
Dynamic range: 50 dB
View mode Progressive electron exposure 1 line to 1247 lines
Pixel area: 2.2 μm x 2.2 μm
Dark current: 15 mV/s at 60°C
Package Included:
1 x OV2640 2.0 MP Mega Pixels 1/4'' CMOS Image Sensor SCCB Interface Camera Module for Arduino UNO
ESP32-CAM Board+OV2640
Features:
Low-power dual-core 32-bit CPU for application processors.
Main frequency up to 240MHz, computing power up to 600 DMIPS.
Built-in 520 KB SRAM, external 4M PSRAM.
Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
Support OV2640 and OV7670 cameras, built-in flash.
Support image WiFi upload.
Support TF card.
Support multiple sleep modes.
Embedded Lwip and Free RTOS.
Support STA/AP/STA+AP working mode.
Support Smart Config/AirKiss one-click distribution network.
Support secondary development.
Specification:
Voltage: 5V
Current: 2A
Dimensions: 2.7x4cm/1.06x1.57inch
Color: As shown
Quantity: 1Pc
Note:
1.Transition: 1cm=10mm=0.39inch
2.Please allow 0-3mm error due to manual measurement. pls make sure you do not mind before you bid.
3.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!
Package Included:
1 x Development Board
Refund
Shipping
Payment
Feedback
Refund
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Shipping
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.
Payment
We only accept payment through Paypal.
Items will go to post within 1-2 business days after payment confirmed.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 03.07.21 hat der Verkäufer die folgenden Angaben hinzugefügt:
