-40%
Dual 12 Stereo Level indicator lamps Light LED VU Meter Audio Display Analyzer
€ 4.74
- Description
- Size Guide
Description
Dual 12 Stereo Level indicator lamps Light LED VU Meter Audio Display AnalyzerDescription:
Ultra-small size stereo level lights, light bar can be adjusted to rise, the rate of decline and peak lamp residence time, the rate of decline. Each lamp set up a separate current limiting resistor, Ensure the same brightness of the different color lights, Signal input through the op-amp isolation, Avoid single-chip high frequency interference audio.
Features:
1. The minimum volume, PCB the size of 80mm x 14mm , LED module area: 58mm x 14mm .
2. The feature-rich, user can freely adjust each light bar and the main peak of the real speed of light, with the most suitable for their own display.
3. Audio input through the TI original signal isolation, the maximum to avoid the single-chip high-frequency interference to an audio circuit in series.
4. Different colors of light alone provided a current limiting resistor. Guarantee a perfect match.
Notice:
1.When welding is completed for the first time test, the factory setting must be restored by pressing and holding the button for 10 seconds. Because the program burned into the chip is not in the initial working state, you must restore the factory settings first, then the level lights are in normal working condition! !
2. The data will be saved automatically after 5 seconds in every setting is changed. when the data will be saved, all the lights will extinguished one time. due to the first restore factory settings will save multiple data, so the lights will extinguished many times, please wait for all the data stored and then power-off or other settings and operations! If the power is changed immediately after the change, the changed data will not be saved.
3. MCU used time-sharing sampling when sampling, so that there is dual-channel simultaneous parallel input signal changes fast, the amplitude of the two light bar display may may be differences, this is a normal situation.
4. In extreme cases, there maybe have very slight high frequency noise. Recommended to replace the signal input wire to dual-core shielded wire in head position.
5. Operating Voltage: 7-12V, Current can work in more than 100MA. Prohibited Voltage exceeds 12V or positive and negative reversed, otherwise it will cause level indicator damage.
Display Effect:
1. Strip show + after peak stay falling
2. Strip show + after peak stay disappearance
3. Strip show + (no peak display)
4. Strip show + after peak flow to the right disappears
5. Ribbon display + (three lights)
6. Strip show + peak marquee effect
7. Strip show + after peak lamp jump two bits to right disappears
This level lamp have standard display mode and wide range of automatic gain control(AGC)mode.
Working Voltage: DC 7-12V 100mA
Colors: 7 Green + 2 Orange + 3 Red
Package Included:
1PC*Micro Dual 12 Level Indicator (
DIY Kits or Assembled, Depend on yourself
)
1PC*5pin Cable
Payment Method
Returns Policy
Feedback
Payment Method
1. PayPal payment accepted only.
2. Items will be shipped to your eBay address. Please make sure it is correct.
Returns Policy
1. Customer satisfaction is our top goal. We believe our items are so outstanding. All products are quality checked. They are new and in good condition when shipped to our customers. We are convinced you will be happy with your Purchase.
2. If product is defective or damage upon arrival, or wrong product shipped, please contact us immediately. Returns accepted within 14 days of delivery date and item must be in original new condition, not worn or altered in any way with attached tags & wrap. Otherwise deal is final. Return shipping must be paid by buyer.
3. Please contact us first if you have any problems/questions/concerns. We will be happy to resolve any issues you may have in a cordial and friendly manner.
4. We appreciate your Postive Feedback, and will do the same in return. DO NOT leave negative feedback without first communication with us. Please allow max 2 business days for us to response.
Feedback
When you satisfied with our product and services please leave us positive feedback.
If a problem occurs, contact us immediately with any email request. Just contact us using the " Ask the seller a question" link on eBay.
Am 05.01.21 hat der Verkäufer die folgenden Angaben hinzugefügt: