DC12V Dual LED Display Temperature Controller Switch Module Relay Output

Description

integratemote
integratemote
Recommended
New product
DC12V Dual LED Display Temperature Controller Switch Module Relay Output
1. Using high-quality materials, the quality is guaranteed
2. Durable and long life
3. Small and exquisite appearance
4. Accurate measurement data
5. Wide range of applications
Parameter:
Temperature range: -20℃～＋100℃
Measurement accuracy: 1℃
Minimum temperature difference: 0.1℃
Refresh rate: 0.5S
Input power: DC 12V
Measurement input: 1 meter NTC (10K 0.5%) metal waterproof sensor
Output: 10A relay
Environmental requirements: -10℃～＋60℃ Humidity 20%～75%
Size: 46mm*40mm
Instructions for use:
Indicator light and digital tube status indication
1. Indicator light: If the relay is disconnected, the indicator light goes out. If the relay is on, the indicator light will be on.
2. Digital tube: If the digital tube displays "- - -", please check as follows: 1. Whether the temperature sensor is lost or damaged. 2. Whether to enable high temperature protection in heating mode 3. Whether to enable low temperature protection in cooling mode. If it is in both protection modes, the relay will open
Buttons: There are three buttons on the thermostat: button +, button -, and SET button.
1. Button+: used for rapid accumulation of numbers.
2. Button-: Used for rapid decrement of numbers.
3. SET key: The SET key has three functions: 1. Setting the temperature 2. Viewing the temperature and working mode 3. Setting the parameters.
4. SET (short press): The digital tube will flash according to the number of short presses, and the temperature can be set when flashing. Once done, the temperature will be automatically saved within 5 seconds. You can also triple-tap to save.
5. Setting (long press): You can enter the actual temperature and working mode interface, the digital tube (upper) is the actual temperature, and the digital tube (lower) is the working mode. C means cooling, H means heating mode, OFF means stop.
Mode settings:
1. High temperature start refrigeration mode: set start temperature > stop temperature.
If the detected temperature ≥ start temperature, the relay will turn on and start cooling mode; if detected temperature ≤ stop temperature, the relay will turn off and stop cooling mode. For example: we set the starting temperature to be 30°C and the end temperature to be 25°C. When the detection temperature is ≥30°C, the relay is turned on and the indicator light (red) is on; when the detection temperature is ≤25°C, the relay is turned off and the indication is The light goes out.
2. Low temperature start heating mode: set start temperature < stop temperature.
If the detected temperature is less than or equal to the starting temperature, the relay will be turned on and the heating mode will be started; if the detected temperature is greater than or equal to the stopping temperature, the relay will be turned off and the heating mode will be stopped. For example: we set the starting temperature to be 25°C and the end temperature to be 30°C. When the detection temperature is ≤25°C, the relay is turned on and the indicator light (red) is on; when the detection temperature is ≥30°C, the relay is turned off and the indication is The light goes out.
3. Start temperature = stop temperature The temperature control will be turned off and the relay will be disconnected.
Package list:
Thermostat*1
About us
Payment
Shipping
Feedback
Return Policy
Contact Us
About us
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Return Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact Us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 25.05.2022 hat der Verkäufer die folgenden Angaben hinzugefügt: