-40%
DC 300W 20A CC CV Constant Current Step-Down Voltage Buck Converter Adjustable
€ 0.7
- Description
- Size Guide
Description
DC 300W 20A CC CV Constant Current Step-Down Voltage Buck Converter Adjustable300W 20A Step down
Features:
With a wide input voltage range from 6V to 40V, the step-down converter can accurately adjust output voltage and current.
The efficiency can be up to 96%, measured at 20A, converting 24V to 12V.
It is designed with 75V/80A large current dual MOS tube.
Input and output use high frequency low resistance electrolytic capacitor, low ripple, stable output.
Wiring is convenient with these large current 30A screw terminals.
The buck module has 2 heat sink that could enhance heat dissipation.
When there is a big difference between input and output voltage, please decrease power and current.
Specifications:
Input Voltage: 6V to 40V DC(10V to 40V is suggested)
Output Voltage: 1.2V to 36V DC
Output Current: 20A(max.), 15A(suggested)
Efficiency: 95%(24V to 12V, 20A)
Output Ripple: ≤50mV
Wiring Method: Terminal
Short Circuit Protection: Self-recovery(cannot short circuit for long time)
Size: 60 x 53 x 27mm / 2.36 x 2.08 x 1.06"
VO+: Output positive
VO-: Output negative
+IN: Input positive
-IN: Input negative
CV: Output voltage adjustment
CC: Output current adjustment
EN: Enable, low voltage level shut off output; suspension, high voltage level is effective
When input and output is common grounded, no-load CV output constant voltage,CC output constant current
Package Include:
1PCS 300W 20A Constant Current Adjustable Buck Converter Step-Down Voltage Module
1W 350mA Step down
Description:
1. 5-35V input range
2. Output 350mA?0mA drive 1-10 pieces 1W LED
3. Close support PWM dimming high output low on output.
4. Buck mode LED guarantee total pressure is lower than the input supply voltage 2-3V to work.
5. Ultra-small size design (length 3.6cm * Width 2cm), low noise, safety features.
6. High-efficiency, low consumption, stable chip to achieve energy saving and environmental protection projects.
7. Constant output current, low ripple. LED used to ensure security, stability, improve the LED light effect, reducing the lumen.
8. Overload, short circuit, overcurrent protection, to ensure the supply security.
9. Wide input voltage, VIN+ and VIN- is the input power input positive negative.
10. LED connected to the anode of LED+, LED- connected LED cathode.
Package included:
1PCS 1W LED Driver 350mA PWM Light Dimmer DC-DC Step Down Module 5-35V
Refund
About Shipping
Payment
Refund
All package need to
wait 30 days
(US only need 7-10 days)
,
Please take care it.Less than 30 days,we can't take a refund
.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please keep in touch with us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
About Shipping
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.
Payment
We accept PayPal only. But we only
Accept
your
Ebay Address
,Please Make sure it's 100% right.
Payment must be received in 5 business days of auction closing.
Please leave note for your special request (e.g. Colors or Size) in PayPal when you pay the order.
Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched.
Am 26.05.21 hat der Verkäufer die folgenden Angaben hinzugefügt: