-40%
Bremsenentlüfter Bremsenentlüftungsgerät Bremsflüssigkeit Entlüfter Elektrisch
€ 148.89
- Description
- Size Guide
Description
Store categorySign Up Now !
You may also like
Elektrisch Bremsenentlüftungsgerät Bremsenentlüfter Kfz Bremse Entlüften Wechsel
Product Description
Applicable to European, American and Asian car models:
Four sub-pumps changing oil at the same time, it is fast and labour-saving.
Adjustable pulse oil change, which can effectively clean the pipeline and change the oil more thoroughly.
Powerful recovery function, it can quickly recover used brake fluid at the same time.The air inlet port has a water separating and filtering device, which can separate the moisture in the air, avoid it mixing with the oil, and ensure the quality.
Application:
For Mercedes-Benz, BMW, Volkswagen,Skoda, Volvo, Land Rover, Jaguar,
Bentley, Porsche, Buick, Chevrolet, Ford,Citroen, PEUGEOT , Chery, Changan,Mazda, BYD, Roewe, Renault, Geely,ZHONGHUA, Great Wall Motor, MG,Lexus, Cadillac,Tesla,Ford,Audi,Peugeot,Toyata
Technical Parameters
Voltage: 220-240V 50/60Hz or 110-120V 50/60Hz
Maximum power: 35W
Maximum flow: 1.2L/min
Working pressure: 0.6-3.0 bar
Oil shortage protection: support
Filling hose length: 3.5m
Noise: ≦70dB
Host size: 250×185×280mm
Features
Compared with the traditional pressure brake fluid exchanger, this pulsating brake fluid exchanger can effectively avoid bubbles during the filling process and optimize or avoid the manual exhaust process. Built-in pressure monitoring device. If pressure cannot be built up or the pump sucks in air, the pump is disconnected to prevent injecting gas into the automobile brake fluid container.
How to adjust working pressure correctly?
When the device is out of factory, the working pressure of the pressure regulator is set to 1~1.5 bar, to ensure that the liquid storage chamber does not deform while changing liquid, thereby ensuring the tightness of the secondary sealing ring.
In addition, it is also feasible to exhaust or change the liquid at a lower working pressure by adjusting the pressure and the size switch.
In special circumstances, while operating under a higher working pressure, be aware of the excessive pressure adjustment, which may damage the brake master cylinder of the brake system.
Operation steps:
Note: no need to start the vehicle for the operation.
1. Raise the car to a suitable height so the drive wheels are not on the ground.
2. Connect the four oil pots of the device to the car brake cylinder, and loosen the exhaust screw of the brake cylinder to ensure that oil flows out.
3. Pour in 2L new brake fluid from the fuel filler port of the equipment, and find the matching model connector to connect to the fuel filler of the brake master cylinder.
4. Connect to 12V car power and turn on the power switch button.
5. Press the Vacuum Switch button.
6. Press the Fuel Switch button to change the brake fluid.
7. During the oil changing process, look at the car brake oil tank mouth, if the refuel is too slow, press the acceleration switch button on the device to accelerate refueling; if it’s too fast, press the deceleration switch button to slow down.
8. After the oil change is completed, the used oil in the tank of the equipment must be drained clean. If it’s not emptied clean, the vacuum pump will be damaged and the oil change operation cannot be performed.
Notice:
Please check each connection if there is any leak, when changing oil, and whether the connecting hose is damaged, to keep the new oil filler port clean.
Package List:
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
1. We accept PayPal only.
2. Credit card (Visa, Eurocard/MasterCard, Amex, and Switch or Visa/Delta) payment can be accepted ONLY through PayPal (You don't need a PayPal account)!
3. Other payment methods (Bank transfer, Cheque, etc.) are NOT acceptable !
4. Please make the payment within 3 days.
Delivery details
1. Nowadays, you can meet AUTOOL on every continent and in 160 countries around the world.
2. Item will be shipped out within 1-2 working days (except weekends and holidays) after the payment is cleared or received.
3. We will send item to your Confirmed Shipping Address in Paypal only.Please confirm your order and address before you bid or pay the item.
4.International Buyers Please Note:
1) Please check with your country customs office to determine what these additional Import tariffs costs will be prior to bidding / buying.
2) It's the buyer's responsibility to complete clearance when parcel reached your Customs. We are Not responsible for buyers's local taxes, please consult local Customs for Tax Details. Customs rates
vary from country to country, please understand.
5. Any further queries, please don't hesitate to email us. Thank you.
Terms of sales
OUR SERVICE
From the date of receipt, we provide a 3-YEAR WARRANTY for the main unit and all the accessories included.
Warranty Access
1. The repair or replacement of products is determined by the actual breakdown situation of product.
2. It is guaranteed that AUTOOL will use brand new component, accessory or device in terms of repair or replacement.
3. If the product fails within 90 days after the customer receives it, the buyer should provide both video and picture, and we will bear the shipping cost and provide the accessories for the customer to replace it free of charge. While the product is received for more than 90 days, the customer will bear the appropriate cost and we will provide the parts to the customer for replacement free of charge.
These conditions below shall not be in warranty range:
1. The product is not purchased through official or authorized channels.
2. The product breakdown because the user does not follow product instructions to use or maintain the product.
About us
OUR STORY
AUTOOL was founded in 2014 in Shenzhen, China, inspired by a group of vehicle enthusiasts. They have been in the field of car repair tools for more than ten years, dreaming of a simpler and more efficient solution for car repair!
OUR PRODUCTS
Product development, quality control,and customer service are always highest on our list of priorities. Moreover, we will launch premium new products persistently, with patented technologies and innovative ideas embedded in.
OUR VISION
We are always responsible for our products, responsible for our customers and responsible for our partners. We aspire to be an outstanding and competitive supplier of automotive tools, providing the customers with affordable and high-quality products.
Contact us
1. If you have any further queries, you can feel free to email me via email or eBay message. Thank you.
2.
Please email us first before giving negative feedback or opening a case. Wish we can solve the problem peacefully.
3. Much appreciated if you could leave us positive feedback with five stars.
4. We will reply you within 12 hours and do our best solve the problem with you (Except on Weekends and Holidays)
Work time:Monday to Friday GMT8 (9:00am-18:00 PM)
Feedback