-40%
BCNet-FX Ethernet Communication Processor Module for FX1N/1S/2N/3S/3G/3GC/3U
€ 81.84
- Description
- Size Guide
Description
DescriptionBCNet-FX Ethernet Communication Processor Module for FX1N/1S/2N/3S/3G/3GC/3U/3UC PLC Data Acquisition
Description:
BCnet-FX is an economical Ethernet communication processor, used for Mitsubishi FX1N/1S/2N/3S/3G/3GC/3U/3UC series PLC Ethernet data acquisition. The product adopts industrial-grade design and modularization portable installation, does not occupy PLC programming port. While the programming software/host computer software monitors the PLC data via Ethernet, the touch screen can communicate with the PLC via the multiplex interface X2. It support for Mitsubishi Ethernet protocol and transparent transmission two communication methods.
Specification:
Model: BCNetT-FX
Status display: Pwr COM1, COM2, Link
Ethernet interface: IEEE 802.3 compatible, Link/ Active indicator, line sequence adaptive, support Auto-MDIX
Interface type: R45 female socket
Transmission rate: 10/100Mbps
Protocol support: MELSOFT, MC, BCNetTCP, BCNetUDP, BCNetHTTP, etc.
Number of TCP connection: 6
X1 interface (connect PLC): RS422
Interface type: MD8 communication female port
Transmission rate: 9.6K, 19.2K, 38.4K, 115.2Kbps
Protocol support: FX programming port
X2 interface (connect HMI): RS422
Interface type: MD8 communication female port
Transmission rate: 9.6K, 19.2K, 38.4K, 115.2Kbps
Protocol support: FX programming port
Programming software: GX Works2
Configuration software: kunluntongtai, Kingview, 3D Force Control, etc.
OPC software: KepWare OPC
Diagnosis and parameter setting: IE browser, default 192.168.1.178
Power supply mode: FX communication port directly take power (communication cable) or external 24V DC
Voltage type: 24V DC/100mA
Working temperature: 0~60℃
Working humidity: 90% non-condensing
Installation method: 35mm rail installation
Electromagnetic compatibility: 2014/30/EU
Vibration resistance: 4. 5mm/30HZ/10min
ESD: 6KV
Factory aging: 60 degrees aging box runs for 168 hours, power on and off for 50,000 times
Communication stability: continuous communication with PC for 30 days, 130 million communications, 0 errors
Certification: CE certification
Features:
1. Installed on a 35mm rail, the COM1 port is connected to the S8 programming port of FX, and the COM2 port is connected to the touch screen, without external power supply.
2. Integrated WEB server, convenient to set equipment parameters and run diagnosis.
3. Automatically adjust the baud rate of the FX programming port.
4. Support for Mitsubishi programming software GX Works2, GX Developer Ethernet communication.
5. Support the upper SCADA software through the Mitsubishi MC Ethernet protocol communication.
6. Integrated ModbusTCP server.
7. Support BCNetTCP/IP transparent transmission protocol communication.
8. Support high-level language programming to enable the development of production management systems.
9. Support OPC communication.
10. Support 6 PC Ethernet TCP/IP connections.
11. Support Ethernet firmware upgrade.
Package List:
1 x Communication Module
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
Am 10.08.20 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 10.08.20 hat der Verkäufer die folgenden Angaben hinzugefügt:
Am 24.09.20 hat der Verkäufer die folgenden Angaben hinzugefügt: