AQVOX USB2D/A MKII Digital to Analog Converter (DAC)Super Zustand.

Description

Ich biete ein
AQVOX USB2D/A MKII   Digital to Analog Converter (DAC). Super Zustand.
SPECIFICATIONS
Digital inputs:
Digital Output: USB1.1(2.0)
Analog outputs:
Upsampling/Reclocking (asynchronus):
USB Sound Recording System:
COAX-S/PDIF :
16bit/32kHz - 24bit/192kHz (electrical)
AES/EBU
:
16bit/
32kHz - 24bit/192kHz (balanced electrical)
TOSLINK
:
16bit/32kHz - 24bit/ 96kHz (optical)
USB1.1(2.0) In/Output :
16bit/11kHz - 16bit/ 48kHz (PC, Computer)
Input impedance:
COAX-S/PDIF 75 Ohm, AES/EBU 110 Ohm
16bit/11kHz - 16bit/ 48kHz ( Computer) all digital+ analog inputs
Cinch/RCA unbalanced:
2 Vrms Output Voltage (XLR and RCA output can be used at same time)
XLR balanced:
±2Vrms Output Voltage (XLR and RCA output can be used at same time)
Frequency Rrange:
20 Hz to 20 kHz +- 0,3dB
Output Impedance/Level:
120 Ohm at 1kHz, Cinch/RCA: + 8 dBu, XLR: +14 dBu
192kHz/24bit - Passive Filter
Frontjack with 12V phantom power and a level knob for the microphone input (mic out via USB-out)
at XLR-Output
at maximal volume
Measurements:
Headphone Output:
Supply Voltage:
Power Consumption:
Dimensions:
Weight:
Signal/Noise:
117dB at XLR-Output
110dB at RCA-Output
Dynamic Range:
115dB
105dB at RCA-Output
THD:
0.003% at XLR (32fs), 0.010 at RCA
Jitter:
110ps over all Toslink - peak to peak
40ps over all TOSLINK - RMS, 3ps rms internal
Frequency Range:
20 Hz to 20 kHz +- 0,5dB
THD+Noise:
under 0,03% at 32 Ohm, under 0,008% at 100 Ohm and -6 dBFS
Signal-to-Noise Ratio:
110dB at maximal volume
Signal-to-Hum Ratio:
90dB
Internal power supply, 90-140V- AC /50-60 Hz or 220-240V- AC /50-60 Hz
5 W
(B /H /T) ca. 435 x 59 x 290 mm
ca. 2,8 kg