-40%
6-Bits C51 Digital Electronic Clock Electronic Production Suite DIY Kits
€ 1.37
- Description
- Size Guide
Description
6-Bits C51 Digital Electronic Clock Electronic Production Suite DIY KitsYCL-6 makes the full use of the single-chip resources which is featured with the function of alarm clock, countdown clock, stopwatch and counter.
1. Principle of Operating
The circuit is mainly composed by the single-chip circuit, display circuit, keyboard input, signal ringing circuit and power circuit.
1.single-chip circuit: It's based on AT89C2051 which including the Power-on Reset and clock circuit.
2. Display Circuit: The main component is 2-bit digital tube in red. The driver uses the PNP transistor and it's equipped with current-limiting resistance at every port. It's with scanning-driven way and uses P1.0~P1.6. The colon part use four pieces of diode in Φ3 red with scanning-driven way. And it uses P1.7.
3. keyboard input: The key S1~S3 are with reused function which reused with the display part of P3.5,P3.4 and P3.2. And here is the operating principle.
Output high level at the related PIN to read out the status of keys and debounce via single-chip system to give the keys with corresponding value.
4. Signal Ringing circuit: It's composed by buzzer and PNP transistor. And the operating principle is that the buzzer will send sound in fixed frequency after the PNP transistor turns on. It's with independent port-driven way and uses P3.7. J1 is used for connecting the extrocontrol equipments which will output the low level when there is no ringing signal, or high level with ringing signal.
5. Power Circuit: It's composed by three terminal integrated circuit which will supply the whole system with the stable voltage.
2. Operating Specification
1) Specification of function Keys
S3 is for function choosing key , S2 for function expansion and the S1 for adding the value with one.
2) Operating
It works well if all the components are welded in the right way. And the operating DC voltage is 7V--12V. Please be noted the polarity when connect the power. During the operation, below six functions can be chosen to work, if press the S3 continuously in a short time. And the interval is less than 1 second. Or it goes to the clock function if press the S3 for more than 2 seconds.
Clock Function
:
It displays 10:10:00 when it's on.
Time checking Function
:
The time and colon start flashing after Press the S3 for a short time. Press S2 to add one hour and Pree S1 to add 1 minute. But the second time is unadjustable.
Alarming Function
:
It displays 22:10:00 and the colon lights after press S3 twice in a short time. Press S2 to add one hour and Pree S1 to add 1 minute. But the second time is unadjustable. When the value of hour is over 23:00pm, it displays ——:——:—— which is the function for turn off the alarming function.
Countdown Function
:
It displays O and the colon is in dark after press S3 three times in a short time. The hour time is added after pressing S2 and 1 minute is added after pressing S1. It'll start to countdown when press S2 for the sixth time. The time can be adjusted again after pressing S2 for one more time. And the countdown function is off.
Stopwatch Function
:
It displays 00:00:00 and the colon lights after press S3 four times in a short time. It starts clocking with the stopwatch after pressing S2. And if press S2 one more time, the clocking will be end. And the stopwatch goes to reset status after pressing S1 at this time.
Counter Function
:
It displays 00:00:00 and the colon is in dark after press S3 five times in a short time. Press S2 to add the value with one for counter and Pree S1 to let the counter in reset status.
4.
List of Components
Order
Item Name
Specifications
Code
Item Order
Item Name
Specifications
Code
1
Resistor
1K
R9~R15
20
S8550
Q1
2
1K
R2~R8
21
Transistor
S8550
Q2
3
2K
R16~R17
22
S8550
Q3
4
5.1K
R18
23
S8550
Q4
5
10K
R1
24
S8550
Q5
6
Ceramic Capacitor
30P
C2
25
S8550
Q6
7
30P
C3
26
S8550
Q7
8
104
C4
27
Single-chip Circuit
AT89C2051
U1
9
104
C5
28
Three Terminal IC
78L05
U2
10
Electrolytic Capacitor
10uF/25V
C1
29
Quartz Crystal
12MHz
Y1
11
100uF/16V
C6
30
IC Socket
XH2.54(Horizontal) 2P
J2
12
LED
Φ3 Red-to-Red
D1
31
XH2.54(Vertical) 2P
J1
13
Φ3 Red-to-Red
D2
32
Keys
6*6*4.3
S1
14
Φ3 Red-to-Red
D3
33
6*6*4.3
S2
15
Φ3 Red-to-Red
D4
34
6*6*4.3
S3
16
Digital Tube
4 inches 2-bit Red
DS1
35
IC Socket
20P
U1
17
4 inches 2-bit Red
DS2
36
PCB
49*97.5mm
1
18
4 inches 2-bit Red
DS3
37
Power Wire
2P (Single)150mm
1
19
Buzzer
5V
U3
38
Refund
Shipping
Payment
Feedback
Refund
If you can't receive the product within 2 months (60 days), please contact with us,we promise to payback 100% of your money.
We ensure our products work normally before post.If the products is broken before arrival to you,all you should do is taking a photo to show us our broken product.We promise to payback 100% of your money.
If the item is defect when you receive it or you are not satisfied with it, please return it within 14 days for a replacement or money back. But the items must be back in factory condition. Please contact us and double check the return address before you return it.
If is item is defective in 12 months, you can return it to us. We will send you a new replacement after receiving the defective item.
Shipping
1. We ship to Worldwide.
2. We only ship to confirmed PAYPAL address; your PAYPAL address must match your Shipping address.
3. Any non-received items caused by invalid address registered on PayPal are not in our full refund or replacement policy. Shipping fee has including the local handing and packaging fee.
4. All the items will be shipping within 1-2 working days after receiving the payment, except some holidays.
5. We will not be responsible for any custom delay or tax, because transit time is highly depended and provided by postal Service.
6. If you have any problem, please contact us via message, we will reply message within 1-2 working days, please wait for patient.
Payment
We only accept payment through Paypal.
Items will go to post within 1-2 business days after payment confirmed.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "Delivery on time" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
Am 16.03.18 hat der Verkäufer die folgenden Angaben hinzugefügt: