-40%
4 Achse CNC Router Kit 3Nm Nema 23 Schrittmotor & Stepper Motor Driver DM542T
€ 138.33
- Description
- Size Guide
Description
OverviewItem located in Frankfurt Germany, No Customs Duty and VAT. For any questions, please don't hesitate to contact us (English is preferred). Package including:
4 x Digital Stepper Drive 1.0-4.2A 20-50VDC for Nema 17, 23, 24 Stepper Motor DM542T
4 x High Torque Nema 23 CNC Stepper Motor 4.2A 3Nm(425oz.in) 23HS45-4204S
2 x 250W 36V 7A 115/230V Switching Power Supply
Homemade CNC router video:
https://youtu.be/UO20dkWkDqo
and
https://youtu.be/e9j_a6sYaHM
and
https://www.youtube.com/watch?v=lzk4FJgzGUI
Stepper Motor 23HS45-4204S
Manufacturer Part Number
23HS45-4204S
Motor Type
Bipolar Stepper
Step Angle
1.8°
Holding Torque
3.0Nm(425oz.in)
Rated Current/phase
3.5A
Phase Resistance
1.2ohms
Recommended Voltage
24-48V
Inductance
5.0mH±20%(1KHz)
Weight
1.8kg
Motor Dimension:
Wire Diagram:
Stepper Driver DM542T
Input voltage 20-50VDC
Anti-Resonance provides optimal torque and nulls mid-range instability
Motor auto-identification and parameter auto-configuration when power on, offer optimal responses with different motors
Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
15 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 25000
Soft-start with no “jump” when powered on
8 selectable peak current including 1.00A, 1.46A, 1.91A, 2.37A, 2.84A, 3.31A, 3.76A, 4.20A
Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
Automatic idle-current reduction
Suitable for 2-phase and 4-phase motors
Support PUL/DIR mode
Over-voltage and over-current protections
Notes:
Due to motor inductance, the actual current in the coil may be smaller than the dynamic current setting, particularly under high speed condition.
Power Supply S-250-36
36V DC 7A output
AC input voltage range: 90~132V/180~264VAC
115V/230V AC selected by switch
High efficiency low cost
Forced air cooling by built-in DC fan
Low output ripple and yawp
Over current, over voltage, short circuit and overheat protections
215*115*50mm (L*W*H)
About StepperOnline
Founded in 2005, StepperOnline as a wholesaler for stepper motors, stepper motor drivers, power supplies and cnc router kits.
In 2013, StepperOnline was acquired by OMC Coporation (the leading company in Motion Control industry) formally.
Our goal is to create the best place to provide high quality stepper products with lower price.
We purchase products in bulk to get the best discount from manufacturer, and offer very competitive prices to clients.
We provide the complete product, adequate inventory and rapid shipment, it allows clients to get them with very short lead time.
All of the products come from China Top manufacturers, such as stepper drivers from Leadshine and stepper motors from OSM Technology, etc.
Warranty and Guarantee
For 30 days after the date of purchase, return your undamaged product and receive a full refund for
ANY
reason.
Reminder:
Please contact us via eBay message when you want to return your purchase, we will give you the return information.
For 12 months after the date of purchase, we take care of all quality-related issues with a REPLACEMENT OR FULL REFUND.
Feedback & Contact
The best way to contact us is through eBay messages. We are trying our best to make sure
EVERY CUSTOMER IS 100% SATISFIED!
We will solve your question at 24 hours (Monday to Saturday).
As an eBay selling company, feedback is our bread and butter. Please contact us with any concerns or problems that you encounter before leaving negative/neutral feedback!
If you are satisfied with our transaction, please leave us positive feedback.