-40%
30000RPM 300W 220V Kantentrimmer Router Rand Fräsmaschine Holzbearbeitung tp
€ 32.26
- Description
- Size Guide
Description
HOMEON SALE
+FOLLOW
220V 300W 30000RPM Wood Edge Trim Router Clean Cuts Power Tool Set
Condition:
100% new
Color:
Red & Black & Clear & Silver
Material:
Plastic & Metal
Total Size:
approx.8.9 x 8 x 20.8cm(3.50 x 3.15 x 8.19inch)(L x W x H)
Chuck Diameter:
approx.0.6cm(0.24inch)
Cable Length:
approx.113cm(44.49inch)
Voltage:
220V
Maximum Speed (rpm):
30000RPM
Wattage (watts):
300W
Suitable for:
home woodworking remodeling projects, roundovers and flush trimming
Item included:
1 x Trim Router
(Not included Yellow Router bit)
2 x Wrench
6 x Different accessories
1 x Chinese Manual
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) Please pay attention to safety during operation.
Product Dimension:
Feature:
1) 100% new and high quality.
2) Transparent base for clear line-of-sight.
3) Standard 1/4 inch. Accepts most router bits.
4) Cutting depth adjusts easily for accurate cuts.
Operating:
1) Place the tool base over the workpiece to be cut without contacting the tool with it.
2) Turn on the switch until the tool gets the maximum speed.
3) Push the workpiece forward against the surface of the workpiece, requiring to keep the base flat and uniform speed.
4) When cutting edge, the workpiece should be located on the left side of the tool (from the direction of the feed).
5) When cutting, the cutting depth of a trip should not be greater than 3mm, otherwise it will cause the motor load or difficult to control the tool, can be carried out several times to achieve the purpose of deep cutting.
Am 22.05.20 hat der Verkäufer die folgenden Angaben hinzugefügt: