-40%
2S/3S/4S/5S/6S 18650 3/5/8/10/15/20/30A Lithium Battery PCB BMS Protection Board
€ 0.6
- Description
- Size Guide
Description
integratemoteintegratemote
Recommended
New product
2S/3S/4S/5S/6S 18650 3/5/8/10/15/20/30A Lithium Battery PCB BMS Protection Board
Please make sure you read our descriptions precisely before you place the order
2S 2-3A 5-8.4V Red
Size: 62 * 26 * 6.9mm
Charging voltage range: 8.40-8.45V ± 0.05V
Over-discharge voltage range: 4.6-5.1V ± 0.05V
Maximum operating current: 2-3A
Maximum instantaneous current: 4-6A
Working temperature: -40 --- + 50 ℃
Resistance: less than 45mΩ
2S 3A 7.4V/8.4V; 2S 5A 7.4V/8.4V
Overcharge Detection Voltage: 4.25-4.35V±0.05V; 4.25-4.35V ± 0.05V
Over Discharge Detection Voltage: 2.3-3.0V±0.05V;2.5-3.0 V ± 0.05V
Maximum Working Current: 3A; 5A
Transient Current: 5A; 7A
Operating Temperature: -40-50 degree
Internal Resistance: Less than 45m Ω; less than 300mΩ
Size: Approx. 36x6x1mm/ 1.42" x 0.24" x 0.04" ; 38 * 8 * 2mm
2S 4A 7.4V
Charging voltage:DC 9V CC / CV (MAX:12V)
Maximum sustained discharge current:4A
Overcharge detection voltage:4.29V±0.025V
Over-discharge detection voltage:3V ±0.1V
Internal resistance:protection circuit:(MOSPET ) ≤ 21mΩ
Operating temperature range:-40 ℃ ~ +80 ℃
size: about 3.50*1.70cm/1.38"*0.67"
3S 4A 10.8V-12.6V
Maximum protection voltage ( for every single cell ): 4.255V ± 0.05V
Minimum protection voltage ( for every single cell ): 2.35V ± 0.05V
Maximum operating current: 4A
Size: 35mm * 32mm
For Lithium battery operating voltage: 10.8V ~12.6V
Applicable for
10.8V (3.6V * 3S) lithium battery
11.1V (3.7V * 3S) lithium battery
12.6V (4.2V * 3S) lithium battery
3S 3A
Size: 48 * 15 * 1.0 mm
Discharge voltage range: 2.5-3.0V±0.05V
Charging voltage range: 4.25-4.35V±0.05V
Maximum working current: 3A
Maximum instantaneous current: 4-6A
Working temperature: - 40 --- +50 ℃
Resistance: less than 45 m Ω
3S 8A 12.6V
Size:50mmx16mmx3.5mm (LxWxH)
Supported Battery type: three cell 4.2V Lithium ion battery
Overcharged voltage protection: 4.35V
Overdischarged voltage protection: 2.7V
Maximum Continous Curent: 8A
Maximum Peak Curent: 15A, <20ms
Internal resistance:<8mΩ
Operating temperature:-20 to 70 °C
3S 10A 10.8V-12.6V
Size: approx.50x16x1mm
Maximum discharge current: 10A
Overcharge detection voltage: 4.25-4.35V±0.05V
Over-discharge detection voltage: 2.3-3.0V±0.05V
Maximum working current: 5A-8A
Transient current: 9A-10A
Operating temperature: -40~50℃
Quiescent current: <6uA
Internal resistance: <60mΩ
Suitable for:
10.8V (Rated voltage of polymer battery)
11.1V (18650 or 3.7V lithium battery rated voltage)
12.6V (Lithium battery full charge voltage)
3S 15A Red
Module:3S Li-ion Lithium Battery Protection Board
Overcharge detection voltage :4.25±0.025V
Overcharge Lift the voltage:4.15±0.05V
Over discharge detection voltage :2.50±0.08V
Over discharge Lift the voltage:3.00±0.1V
Overcurrent current:20-30A
Working current:15A(Natural cooling 10.A, add heat sink 15A, the maximum instantaneous current 30A)
Operating temperature: -40-85℃
Size: Approx. 50x22x4mm
3S 20A 12.6V
Size: 59*20*3.4mm
Charging voltage: 12.6V
Maximum output current: 20A
Maximum output power / charging power: 252W
3S 25A 11.1V 12.6V
Size: about 56mm*45mm*1.2mm
Over voltage range: 4.25-4.35v±0.05v
Over discharge voltage range: 2.3-3.0v±0.05v
Maximum operating current: 0-25A
Maximum transient current: 34-40A
Quiescent current: less than 30uA
Internal resistance: less than 100mΩ
Working temperature: -40---+50℃
Storage condition: -40-- +80℃
4S 68mA 4.2V
Features: 4.2V Balance function
Operating Current: 68mA
Welding Point Introduction:
1. B4 +: connect with a positive battery
2. B3 +: connect with junction between battery 1 and battery 2
3. B2 +: connect with junction between battery 2 and battery 3
4. B1 +: connect with junction between battery 3 and battery 4
5. B-: Connect with negative battery
4S 8A 14.8V
Model:4 serial 14.8V 8A protection board
Size:18*53*3mm
Operating Current:0.5A-8A
Overcharging Protection Voltage:single cell 4.20V+/-0.025V
Overdischarging Protection Voltage:single cell 2.80V+/-0.1V
4S 8A 16.8V
Dimension: 50mmx16mmx3.5mm (LxWxH)
Supported Battery type: Four cell 4.2V Lithium ion battery
Overcharged voltage protection: 4.35V
Overdischarged voltage protection : 2.7V
Maximum Continous Curent : 8A
Maximum Peak Curent : 15A, <20ms
Output Short circuit protection : YES
Internal resistance: <8mΩ
Operating temperature : -20 to 70 °C
4S 4-5A
Dimensions: 48 * 15 * 1.0mm
Charging voltage range: 4.25-4.35v±0.05v
Over-discharge voltage range: 2.3-3.0v ± 0.05v
Working temperature: -40 ~ + 50° c
Maximum operating current: 4-5A
The maximum instantaneous current: 6-7A
Resistance: less than 45mΩ
4S 15A Red
overcharge detection voltage :4.25±0.025V
overcharge Lift the voltage:4.15±0.05V
over discharge detection voltage :2.50±0.08V
over discharge Lift the voltage:3.00±0.1V
overcurrent current:20-30A
operating temperature:40-85℃
Size:50*22*4mm
4S 20A
Size: approx.65*32*4mm
Maximum output current: 20A
4S 30A 14.8V
Working current: 30A
Balanced current: 60mA
Over current: 60A
Temperature range: -30 - +80℃
Over charge detection voltage: 4.28+ 0.05 V
Over charging voltage: 4.095-4.195V
Over discharge voltage: 2.55±0.08
Size:56x45x3mm
5S 10A 16.8V/21.6V
Voltage: 16.8V / 21.6V
Over-discharge recovery voltage: 2.90V ± 0.08V
Maximum operating current: 10A
Operating temperature: -40 --- + 50 ℃
Maximum instantaneous current: 15A-20A
Storage conditions: -40-- + 80 ℃
Static current: less than 20uA
Effective life: more than 50,000 hours
Resistance: less than 30mΩ
Short circuit protection: protect and automatic recovery
balanced: No
Size: 53mm * 18mm * 4mm
5S 15A 21V
Size: approx. 60*23mm
Charging voltage: 21 V
Charge MOS pressure value: 35 V
Discharge MOS pressure value: 35 V
Charging current: 56 A
Continuous discharge current: 15 A
Over current protection: 50/55/60 A
Over current protection delay: 20/25/30mS
Single section since the power consumption: 30uA
Single section between the power consumption: 3uA
Single section over charge detection voltage: 4.18- /4.22V
Over charge recovery voltage 4.05- 4.15 V
Over charge detection delay: 0.5/1.0/2.0S
Single section over discharge detection voltage: 2.75-2.85 V
Over discharge recovery voltage: 2.90-3.20 V
Over discharge detection delay: 0.5-2.0S
6S 15A 25.5V
Size: approx.50*30*2mm
Lampshift maximum discharge current: 15A
Instantaneous discharge current: 25A
Charging voltage: 25.5V
Charging current: 15A (MAX)
Overcharge detection voltage: 4.28 ± 0.05V
Overcharge protection delay: 0.1S
Overcharge release voltage: 4.08 ± 0.05V
Over discharge detection voltage: 2.55 ± 0.08V
Overdischarge detection delay: 0.1S
The overdischarge release voltage: 2.9 ± 0.1V
Overcurrent detection voltage: 150mV
Overcurrent detection delay: 9MS
Overcurrent protection current: 30 ± 3A
Overcurrent protection release condition: Disconnect the load
Short circuit detection delay: 250uS
Short circuit protection Release condition: disconnect negative open
Main circuit conduction resistance: ≤20mΩ
Working current: ≤30uA
Sleep current (battery over discharge) ≤10uA
Temperature range: -30 / + 80 ℃
Package Include:
1pc
About us
Payment
Shipping
Feedback
Return Policy
Contact Us
About us
1.A large number of products for you to choose
2.We have an independent customer service team to quickly answer your questions
Payment
1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase.
2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country.
Shipping
1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders.
3.All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.
Feedback
1.We greatly appreciate your POSITIVE feedback. Please do NOT leave negative feedback without asking for help.
2.Please DON'T leave negative or neutral feedback if you haven't received item in 30 days, because we have mentioned the shipping time repeatedly.
Return Policy
1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse.
3. Please include your eBay ID and item number with any email requests.
Contact Us
1. If you have any questions, please feel free to email our service specialists.
2.Just contact us using the " Ask the seller a question" link on eBay.
3.Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem.
Am 31.12.20 hat der Verkäufer die folgenden Angaben hinzugefügt: