275nm UV-C LED card for UV curing lab disinfection

Description

Caution
: UVC light is dangerous and direct exposure to it must be avoided. This product should only be powered on once it has been set up and there is no possibility of exposure to eyes and skin.
.
UV LIGHT FACT SHEET
https://ehs.uky.edu/docs/pdf/fs_uv_0001.pdf
UVC-WIPE
30mA UV-C LED card for UV curing or disinfection applications.
UVC-WIPE is a
UVC light card
featuring an
on board step up converter and two 275nm leds.
It has been
thermally
designed so it doesn't need a heatsink as the heat is distributed around the whole assembly.
It can be powered using either a standard micro-USB cable and a phone charger, using a standard DC adapter with inner positive 2mm barrel connector or with flying leads directly attached to screw terminals
Usage examples:
Surgical mask disinfection ( the card could be attached inside a drawer turned upside down )
UV curing
EPROM erasing
This product emits a low yet dangerous ammount of UVC light intensity. Thus, exposure times should be determined for each and every specific application. Disinfection effectivity depends on light intensity, time of exposure and distance to the emitter.
Details:
Power input:
USB, 2mm barrel connector, block terminal
Input Voltage:
5-12V DC
On board step-up converter that provides nominal current to LEDs
2x 30mA 275nm
LEDs
with a total of
6mW
of radiant flux distributed in a 115º view angle
Designed and assembled in Spain
This is a private listing without any warranty, eBay and paypal warranties and policies apply.