-40%

20Kpps laser scanning galvo galvanometer scanner set ILDA

€ 62.83

Availability: 143 in stock
  • Marke: RGB-lasers.com
  • Produktart: Laser
  • Condition: Neu
  • Lichtart: RGB
  • Herstellernummer: RGB20
  • Licht-Effekte: Laser
  • Rücknahme akzeptiert: ReturnsNotAccepted
  • Modell: RGB-SCAN20
  • DMX-Steuerung: Nein
  • Steuerung: ILDA

    Description

    20Kpps Scanner set
    PRODUCT DESCRIPTION:
    This is a fast and reliable scanner set based on a moving magnet galvanometer. In combination wit the small drivers and power supply unit this set can be implemented in almost any application. The speed is 20kpps (20.000 points per second) at an angle of 20 degree. By adjusting the potentiometers the speed can reach 35Kpps at an an angle of 5 degree.
    TECHNICAL DATA:
    System:Closed Loop Moving Magnet Scanner
    Input resistance:200K ohms,differential
    Signal Input voltage: ±5V
    Input voltage requirements: +15V/1.0, -15V/0.6A
    Operating temperature range:0~50 degrees C
    Optical angle: ±30° max
    Scanner speed:>20Kpps(ILDA testpattern ±20°optical)
    Mirror dimensions WxL: 7mm*11mm*0.6mmï (wide wave-length)
    Board size:8.0cm(long)*5.0cm(wide)*2.8cm(high)
    THE MEASURING PROCEDURE:
    This scanner set was measured with PANGOLIN QM2000 card. Running at the desired output speed. Using the standard ILDA test pattern. Laboratory power supply at +/-15VDC,room temperature. Windows PC with Pangolin,12/30k ILDA testframe, full size. 7x11x0.6mm mirror was used during measuring period. The galvos are fixed in the standard mounts on an aluminmum baseplate without forced cooling.
    20kpps @ 20 degree
    22kpps @ 15 degree
    25kpps @ 10 degree
    30kpps @ 8 degree
    35kpps @ 5 degree
    POTENTIOMETER DESCRIPTION:
    IS = Input scale (adjusted only in factory)
    SG = Servo gain (power of the feedback signal for internal PID controller
    LFD = Low frequency damping (correct overshoot)
    HFD = High frequency damping (correct undershoot)
    LIN = Zero offset (electrical offset of the driver, adjusted only in factory)
    PS = Position scale (increases or decrease input sensitivity of the computer, DO NOT change it)
    FILES:
    Manual
    ABOUT US:
    Laserwinkel is a shop specialized in lasershow equipment and is located in the Netherlands. We have gathered years of experience in the industry, first as hobby and later as company so we know all the in's and out's of the products, therefor we can offer top support with any questions you may have.
    PAYMENT:
    PayPal is our preferred payment method and we will only accept Payment from a Confirmed and Verified PayPal account. If you have any questions about the payment please contact us.
    We will ship as soon as payment is received/cleared! Please allow personal checks 7 business days to clear.
    SHIPPING:
    All of our shipments are packaged and handled with care.
    We send this products trough express mail service by Post NL / TNT express or DPD.