100ml Refill ink For HP 910 910xl OfficeJet Pro 8035 8028 8022 8020 8025 W1I3

Description

Description
Description&Preview
shipping&policy
Description:
Compatible models: and Canon general ink
Printing color: black/cyan/red/yellow
Ink capacity: 100ML/piece
Shelf life: The product can be stored unopened at room temperature for 2 years
Note: Please keep it out of the reach of children, avoid direct sunlight, and store at room temperature.
Applicable models: suitable for HP Canon desktop inkjet printers
The package includes:
1*ink
Features:
1. Using carbon zero technology, that is, the diameter of the particles contained in the ink tends to 0. In layman's terms, the nozzle will not be blocked by long-term use. This is the key to whether the compatible ink cartridge is accepted by you.
2. No plugging, no damage to the printer head, the pH value of the ink is similar to the original ink, the product is filtered to ensure uniform particle size, ion concentration, etc., comparable to the performance indicators of the original ink, and fundamentally prevent nozzle clogging It may even damage the print head.
3. Good fluency, strict control of raw materials, reagents, water and other raw materials, and advanced testing equipment for strict process control to ensure that the nozzle does not dry for a long time, resulting in high fluency of the ink.
4. The ink quality is stable. The ink is strictly controlled in terms of raw materials, production technology, performance indicators, etc., to ensure that the ink can be stored for three years in an unopened state at room temperature, and the printed output can be stored for a long time, and the quality can be Comparable to original ink.
5. Good printing effect and vivid color. Good light resistance, the printed image can be stored for a longer time.
6. The 100ML ink is packaged in a sharp-necked bottle, which is more convenient for continuous supply of ink, and can prevent ink from leaking out when adding ink, which is convenient for you to add ink and save ink.
7. Green and environmental protection: use PP or HIPS rubber compound, add degradable ingredients, which can be decomposed naturally, with good applicability and flexibility, and reduce environmental pollution.
8. Cost-saving: Under the premise of satisfying the printing quality of personal and ordinary office environments, choosing our consumables can save more than 85% of printing costs a year.
Precautions
1. Please use it as soon as possible after opening the ink bottle cap, and try to keep it sealed when not in use.
2. The color of the ink must correspond to the color code of the ink cartridge to avoid adding the wrong ink, otherwise the printed picture will be distorted and color cast.
3. Do not squeeze the ink bottle too fast to avoid ink overflow.
Note: Self-filling ink saves costs and protects the environment, but the key to successful ink filling is to choose high-quality ink and learn to fill it scientifically.
First of all, the filled ink cartridge must be intact. If there is a lot of resistance or ink leakage when filling ink, the ink cartridge is damaged and cannot be used.
Secondly, the amount of ink added should be moderate. If the amount of ink is overfilled, it will not only cause ink leakage, but the overflowing ink is very likely to wet the machine parts and cause a short circuit and damage the machine. If you add too much ink, wipe the ink cartridges and print head with a soft tissue to absorb the excess ink.
In addition, avoid the ink cartridges from being exposed to the air for a long time to dry up and become blocked. A more standardized approach is to fill the ink cartridge immediately after the ink is filled, and print it immediately after filling the ink. If it is not used temporarily, it can be stored in the print head protection clip. The special rubber pad can block the air and keep it Long-term wetting of the nozzle. If the ink cartridge nozzles are dry and blocked, immerse the print head part (excluding the circuit board) in warm water for about 10-20 minutes to dissolve the dried dye (please note that the circuit board must be kept dry during this process), and then print Put the head on a few soft paper towels to absorb the residual water and ink from the nozzle. Do not wipe the print head too hard. The number of times an ink cartridge is filled is affected by its nozzle and sponge life.
Note: Do not add the ink too quickly to avoid overflow. In addition, the amount should be moderate. If the ink is excessive, not only will it cause ink leakage, but the overflowing ink is very likely to wet the parts and affect the appearance. If you add too much ink, lightly damp the ink cartridge and print head with a soft paper towel to absorb the excess ink.
There is a sponge in the ink cartridge. Please wait for 1 hour after refilling the ink to allow the ink to fully permeate. Use the cleaning program that comes with the printer 2-3 times before printing.
Preview:
Thank you for your purchase
Problems?
You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions:
Shipping
● We will arrange shipping for you within 24 Hours after payment cleared except the holidays.
● We always send the item to the address you give us on PAYPAL to ensure the security of the item. If you have changed your address, or want us to ship to another address, please change to the new address when you pay us with PAYPAL, otherwise we will not be responsible if the package is lost.
Payments
We accepts Paypal only If you have any questions about the payment,please contact us through eBay message.
Import Duties
In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.
Terms & Conditions
By bidding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All eBay terms and Conditions before bidding.
All pictures are for illustration purpose only and Colours may vary slightly.
Our store obeys all eBay Rules and Policies.
Returns Policy
To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.
Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging.
All shipping and handing charges are non-refundable
Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items.
Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.
hello, guys, thank you for visiting my store.There are so many useful and cheap item in our store. we will be ready to reply you ASAP.