-40%
0.49/0.69/0.91/0.96/1.3 inch IIC I2C/SPI Screen OLED Display Module For Arduino
€ 0.85
- Description
- Size Guide
Description
Keywords you may need：Sensors
Modules
Esp8266
Board
R3&ATMEGA2560
NodeMCU
Sheild
Screw sheild
Nano Sheild
Relay
Temperature Controller
Displays
OLED LED&RGB
LCR
Amplifier
Power supply
Step Up
Step down
Converter
Switch
GPS
Light
Wireless/Wifi
Dear customer:
Thank you for visit our store,we are proffessional "Business & Industrie" seller for 10 years,our main products included:Sensors,modules devolpment board, LED displays, other IC procuts an so on,any question about DIY robot,Arduino,or Raspberry Pi will be welcome to discuss with us,we will try our best to supply the most advanced product and price,(if we sale more,the cost of made one product will be reduce and we will change or price to make you save more.
Hope you enjoying yourself here!
We appreciate your business!
Shipping
Payment
Refund
Feedback
Shipping
We will arrange shipping for you
within 24 Hours
after payment cleared except the holidays.
We only ship to the confirmed address provided by PayPal. Before you pay, please make sure your address in PayPal matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand.
-We ship items to Worldwide. Thank you!
-we will ship out the order in
1-2 business days
after payment cleared .Since it is international shipping ,delivery time is about 15--28 business days to arrive to most countries.
Payment
We accept PayPal payment ONLY.
Refund
* We believe our items are so outstanding. We are convinced you will be happy with your Purchase.
* If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund to you after the returned item arrived at our warehouse.
* Please include your eBay ID and item number with any email requests.
Feedback
* When you satisfied with our product and services please leave us positive feedback.
* If you have got the package, please confirm "
Delivery on time
" For us.
* If a problem occurs, contact us immediately with any email request.
* Just contact us using the " Ask the seller a question" link on eBay.
0.49/0.69/0.91/0.96/1.3 inch IIC I2C/SPI Screen OLED Display Module For Arduino
0.49 inch I2C White
Features:
This is a 0.49 inches OLED display module of 64x32resolution in which the emissive electroluminescent layer is a film of organic compound that emits light in response to an electric current.
Working without backlight, the OLED display module could give out light by itself.
In low ambient light conditions such as a dark room, an OLED screen can achieve a higher contrast ratio than an LCD.
OLED display module also has a much faster response time than an LCD.
The display with small dimension is suitable for MP3, function cellphone, smart health device, etc.
Specifications:
Display Size: 0.49in
Resolution: 64*32
Text Color:
White
Driver IC: SSD1306
Interface Type: IIC
Pin Quantity: 4Pin
Pixel Size: 0.155*0.155mm
Operating Temperature: -40~85℃
Working Voltage: 3.3V-5V
Package included:
1 x 0.49" inch White OLED Display Module 64x32 SSD1306 IIC I2C Screen For Arduino
0.69 inch I2C White
Product Introduction:
Size: 0.69 inch
Control chip: SSD1306
Resolution: 96 * 16
Display area: 17.26x3.18mm
Physical size: 32.54x10x2.5mm
Interface type: IIC interface
Number of pins: 4Pin
Working voltage: 3.3V-5V
Display color:
White
Pixel size: 0.16x0.18mm
Operating temperature: -40~85℃
Package included:
1 x 0.69" inch 96x16 SSD1306 IIC I2C Screen White OLED Display Module For Arduino
0.91 inch I2C White/Blue
Description:
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
IIC interface
Display Color:
White/Blue（Optional）
Pin Description:
GND: Power Ground
VCC: Power + (DC 3.3 ~5v)
SCL: Clock Line
SDA: Data Line
Package Content:
1 X 0.91 Inch OLED LCD Display Module
0.91 inch SPI White/Blue
Features:
Driver IC: SSD1306
Size: 0.91 inch OLED
Resolution: 128 x 32
Font Color:
White/Blue（Optional）
Voltage: DC 3.3-5V
PIN Interface: SPI
OLED display, no need backlight, self-illumination, the display performance is better than the traditional LCD display, also lower consumption.
SPI Pin definition:
GND: Power ground
VCC: Power
CLK: Clock line
MOSI: Data cable
RES: Reset line
DC: Data/commands
CS: Chip select (when not use can be grounded directly)
Packaged included:
1 x 0.91" OLED 128x32 SPI LCD Display Module
0.96 inch I2C White/Blue/Yellow and Blue
Description:
128*64 LED display module for Arduino, supports many control chip.
Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC ,SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ℃ ~ 70 ℃
Character Colors: White/Blue/Yellow and Blue
(Optional)
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
Package Included:
1 * 0.96" I2C IIC Serial 128X64 White OLED LCD LED Display Module for Arduino
0.96 inch SPI White/Blue/Yellow and Blue
Features:
Needn't backlight, the display unit can self-luminous
High resolution: 128 * 64
Viewing angle:> 160 °
Supports many control chip: Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption: full screen lit 0.08W
Voltage: 3V ~ 5V DC
Working Temperature: -30 c ~ 70 c
Module Size: 27.3MM *27.8MM
Color:
White/Blue/Yellow and Blue(Optional)
I2C/IIC Interface, need 2 IO only.
Driver IC: SSD1306
Package Included:
1 x 3-5V 0.96" SPI Serial 128X64 OLED LCD LED Display Module
1.3 inch I2C White/Blue
Product Introduction:
1.Size:1.3 inch
2.Resolution:128*64
3.Controlling Chip:SH1106
4.Display Area:29.42*14.7mm
5.Driving Voltage:3.3-5V
6.Operating Temperature:-40~70 celsius
7.Interface Type:IIC
8.Light Color:
White/Blue(Optional)
Pin Definition:
1.GND:power ground
2.VCC:power positive
3.SCL:clock wire
4.SDA:data wire
Package Included:
1*1.3" OLED LCD Display Module IIC I2C Interface 128x64 3-5V For Arduino
1.3 inch SPI White/Blue
Specifications:
1.Neednt backlight the display unit can self-luminous
2.High resolution:128*64
3.Viewing angle:>160
4.OLED screens inside the driver chips : SSH1106
5.Supports many control chip : fully compatible with Arduino 51 series,msp430 series , stm32/2 CSR IC , ETC
6.Ultra-low power consumption:full screen lit 0.08w
7.Voltage 3v-5vdc
8.Work temp : -30c-70c
9.Spi interface
10.The color of word :
White/Blue(Optional)
Pin Description:
1.GND: Power ground
2.VDD:2.8-5.5V power supply
3.SCK: CLK clock
4.SDA: MOSI data
5.RES: Reset
6.DC: data / command
7.CS: chip-select signal
Package included:
1x OLED Display Module for Arduino
Am 31.05.19 hat der Verkäufer die folgenden Angaben hinzugefügt:
